RSF Rainscreen Cavity Barriers for rainscreen & cladding; intumescent-impregnated fireproof sponge with water-resistant silver foil cover. Ventilation holes or a front-facing intumescent strip for gaps up to 50mm wide available. Refer to sizes below Ventilation holes only available for RSF/A/ 1m long Use horizontal or vertical...
Envirograf Buildfix Multi-Purpose Flexible Building Adhesive
Buildfix Multi-Purpose Flexible Building Adhesive is a multi-purpose adhesive for fixing most materials and substrates, giving a strong flexible bond that is water-resistant when dry, reducing the need for screws and nails. Great for fixing skirting, dado rails, panels and plasterboard.
- Low odour
- Ready to use
- Convenient 310ml tube
Envirograf Buildfix Multi-Purpose Flexible Building Adhesive, a water-based adhesive that fixes to many materials and substrates, such as:
- Certain plastics
Use to fix coving and skirting, panels and battening, dado rails and architrave, cladding and plasterboard.
The adhesive is ideal for use in areas where it is difficult to use other forms of fixing, such as screws and nails, and leaves a strong yet flexible bond.
Solvent-free and low odour, supplied ready to use.
- Ideal for bonding timber, brick, card, ceramic, cork, glass, metal, plaster, certain plastics, polystyrene, foams, vinyls, foils and more
- Low odour, solvent free and easy to use
- Single-component adhesive, strong enough to reduce the need for screws and nails
Ensure all surfaces are clean, dry and sound. Apply to both surfaces in lines directly from the tube or spread the adhesive using a flexible application spatula. For porous surfaces simply spread and press the surfaces together. For non-porous surfaces; press together then pull apart and leave for 3 to 5 minutes then press together firmly. Wipe off excess using a damp sponge. Once dry will not be affected by water. Tools, hands and spills can be cleaned with warm water immediately after use.
This Product is a water-based polymer system with inert fillers
- Colour: White
- Specific Gravity: 1.40 to 1.43g/cm³
- Tack Free Time: 5-10 minutes depending on the thickness, room temperature and humidity
- Full Cure: Approximately 24 hours.
- Full bond strength after 48 hours
Multigraf Intumescent material chemical constitution
- Mineral Wool Fibre 20-70% by weight
- Exfoliating Graphite 20-60% by weight
- Organic Binder (including adhesive coating) 5.0-30% by weight
|Efectis 2008-Efectis-R04468||68 Minutes||68 Minutes|
|LPC TE82291||61 Minutes||14 Minutes|
|Chiltern RF97033||51 Minutes||51 Minutes|
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Nullifire FR220 Firestopping Compound is a single part gypsum-based compound providing up to 4 hours fire resistance. FR220 Firestopping Compound provides an effective barrier to the spread of smoke and fire resistance tested in accordance with EN 1366-3, ETAG 026 and Classiffcation 13501:2.
Firetherm Intumastic seals around dry internal joints, pipes and services to insulate and prevent the spread of fire and smoke for up to 240 minutes. Tack free between 15 minutes and an hour Can be over-painted once fully cured Use in movement joints - allows up to 30% movement Optifire Identification Air pressure tested up to 2000 Pa...
Envirograf Rebated Acoustic, Draught, Smoke and Weather Seal is a 3mm deep x 10mm wide x 2100mm long aluminium or plastic holder containing a brush seal in various sizes and colours or a black rubber seal in various sizes and patterns. The holder has a self-adhesive backing for ease of fitting. The seal holder is rebated into wooden doors or...
Firetherm 30/90, providing a 30 or 90-minute fire and smoke barrier in roof voids and large volume areas. Can also be used to provide a fire and smoke barrier in suspended ceiling applications and raised floors. Click to see size references below for 30 or 90-minute fire barriers Lightweight for easy installation to steel or timber (click...
30mm Wire Mesh supports intumenscent slabs in floors, walls and ceilings, as well as when using fire mortar over a large surface area. Priced per metre - use quantities for each metre required 1200mm width Use with Envirograf Fire Mortar (Product 6) Use with SUP Metal Fixing Battens (Product 6)
SikaBoom FR is ideal for sealing pipes penetrating through brickwork and openings in walls, etc. For insulating between brickwork and cladding, around ducting and through cavities carrying pipes and cables where fire protection is required.
Firetherm Intucompound, a fire-stopping compound for creating a fire barrier and sealing around static joints, services and ducting in walls and floors. Asbestos, fibre and halogen-free Good workability Exceptional yield Easy to mix, with good flow Use in dry internal conditions Can be made water resistant with a suitable coating at...
Cast in Concrete Pipe Sleeves with intumenscent lining for setting into concrete and bored holes to allow passage of services (cables, pipes, etc) through fire-rated floors. Refer to sleeve sizes below Includes removable end caps Caps can be cut to accomodate services Suitable for industrial and domestic use
Firetherm Intusil, a fire-stopping sealant designed for aggressive exterior use on high-sheen surfaces (glass, aluminium) and in high-movement joints for up to 50% movement. See the description below for a list of suitable surfaces and substrates. Fully tested for up to 240 minutes integrity and insulation Water resistant, unaffected by...
Protecta FR Acrylic 4hr Acrylic Intumescent Sealant, designed to prevent the spread of fire & smoke through joints & openings in fire rated walls & floors including openings formed around building service penetrations, also maintaining the acoustic design performance in walls & floors. Classified for fire sealing all types...
Intumescent MG & MGL Grilles for doors & walls have intumescent material that expands in fire, blocking the spread of smoke & fire for up to an hour. Supplied as a set of 2, for either side of a ventilation opening. 2 configurations for when one or both sides at risk to fire Slotted or louvre designs Other colours & sizes...
A Fire-Rated Door Viewer that provides discreet observation in doors and screens without compromising fire integrity. See ordering references below Intumescent strips expand in fire to seal gaps Fits doors 44mm to 54mm Includes 6mm armoured glass plate Ideal for use in hospitals and care homes
Firetherm Intudeck provides up to 90 minutes fire resistance under timber floors and is ideal for installing above ceilings that can't be disturbed, such as decorative or made from lath and plaster. 1200 x 600 x 70 mm size Contact our sales team on 0113 2455450 if custom sizes required Up to 90 minutes fire protection Simple...