A ready-to-use fireproof Silicone Sealant for most glazing, sealing, bonding & repairing tasks between building materials and elements, leaving a water-tight and gas-tight seal. The fire silicone provides primerless adhesion to most materials & can be used with alkaline substrates like concrete, mortar & fibre cement. Fire...
Envirograf AM Mastic
This Intumescent Acrylic Mastic is high-pressure for fire protection in joints & between door frames, partitions & walls, around RSJ's, providing a permanent & flexible seal against fire, smoke and toxic fumes. Good adhesion to all materials.
- Can be over-painted
- Standard mastic tube
- For gaps between 1mm & 60mm
- Touch dry in approx. 15 mins
- White, grey, brown & black
Formulated to provide a permanent, flexible joint between door frames, edges of partitions and walls, Envirograf Intumescent Mastic protects against fire, smoke and toxic fumes. Once dry, the mastic can be over-painted.
Supplied in a standard mastic tube, fitting any normal skeleton gun, in white, grey, brown and black colours.
An aqueous acrylic polymer emulsion, plasticisers, inorganic extenders, reinforcing fillers, surfactants and fungicide.
For use as a seal between door frames and walls, around edges of partitions.
A minimum of 12mm depth is required around ceiling, floor and wall joints in computer areas. This prevents Halon gas escaping.
Around RSJ and wall cement joints, Envirograf Intumescent Mastic can be used in conjunction with Envirograf Intumescent Slabs, Block, Expansion Joint and Type E joint. Type E is an easy sponge type seal for large gaps that can be faced with Mastic.
All surfaces should be sound and clean. Oily surfaces should be wiped with white spirit and then dried. Dry, dusty brickwork must be moistened prior to application of Envirograf Intumescent Mastic, using a normal skeleton gun. Extrude the mastic firmly against the sides of the joint, ensuring firm contact. Overpainting can be carried out after surface skin has formed.
Maximum Joint: 60mm.
For gaps over 60mm, fit Envirograf Intumescent Coated Fireproof Sponge (Product 40) first.
Touch dry in approximately 15 minutes on surface
Clean tools with warm water after use.
Health & Safety
This product is non-hazardous but ingestion may cause obstruction.
General cleanliness in use should be observed.
Use goggles and protective clothing.
Do not allow to enter drains and watercourses
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Protecta FR Acrylic 4hr Acrylic Intumescent Sealant, designed to prevent the spread of fire & smoke through joints & openings in fire rated walls & floors including openings formed around building service penetrations, also maintaining the acoustic design performance in walls & floors. Classified for fire sealing all types...
Firetherm's Soffit Liner PIR is a lightweight and space-saving soffit liner system designed to be thermally efficient, acoustic, aesthetic and impact resistant. The liner is available with several different facings upon request. Price on application Please contact our sales team on 0113 2455450 to place an order. Lightweight Space saving...
Envirograf Replacement Hardwood Door Edges are supplied to fit doors with a thickness between 40mm and 56mm, and it is supplied in 2100mm lengths. It is a complete door edge with concealed intumescent and smoke available for gaps 3mm, 5mm, 7mm and with brushes available for other gap sizes. Ideal for use in heavy-traffic areas prone to damage,...
Intumescent Glazing Channels for high noise & vibration areas, absorbing sounds and movement more efficiently. Intumescent material expands in fire to seal up gaps and prevent spread of smoke and fire. Refer to sizes below Held in place with hardwood or softwood beading 10mm channel height up to 30 minutes fire rating 15mm channel...
Board Sealant used to fix fire protection board and quilt materials to concrete and steelwork, with no need for nails or screws. Available in a 310ml tubes Use with products 91, 111, 112, and 113
Firetherm Spanatherm, fire resistant rock fibre expansion joints for slab edging and curtain walling, preventing the spread of smoke and fire. Up to 2 hours fire integrity Vapour and smoke barrier Allows significant movement accommodation 1200 x 600 x 100mm slabs Please contact our technical team on 01132455450 for custom size...
Protecta FR ASF 4hr Intumescent Sealant, designed to prevent the spread of fire, smoke and gases through openings in fire rated walls and floors, specifically linear joints and openings for building service penetrations. The 4-hour rated anti-fire sealant is formulated with fillers that provide noise reduction, creating a robust fire seal by...
Protecta Mineral Fibre Bio Backing Material, made from special alkaline earth silicate (AES) fibres that have been uniquely engineered to offer advantages in high temperature and insulation applications, with low thermal conductivity and heat storage and excellent resistance to thermal shock. Considered a superior alternative to stonewool...
Use Firetherm Soffit Liner Rock as an aesthetically pleasing liner to concrete soffits; the high-density mineral fibre slabs perform exceptionally well thermally and acoustically and, above all, provide a fire safe solution to building requirements. Price on application Please contact our sales team on 0113 2455450 to place an order....
Use Envirograf Cable & Pipe Intumescent Discs to seal around services such as plastic pipes and cables and steel and copper pipes passing through dry lining, lath and plaster and solid walls, providing up to 120 minutes of fire protection. 3 sizes available, 36 to a box - refer further below for ordering references Tested to the...
Firetherm Intusil, a fire-stopping sealant designed for aggressive exterior use on high-sheen surfaces (glass, aluminium) and in high-movement joints for up to 50% movement. See the description below for a list of suitable surfaces and substrates. Fully tested for up to 240 minutes integrity and insulation Water resistant, unaffected by...
Intumescent MG & MGL Grilles for doors & walls have intumescent material that expands in fire, blocking the spread of smoke & fire for up to an hour. Supplied as a set of 2, for either side of a ventilation opening. 2 configurations for when one or both sides at risk to fire Slotted or louvre designs Other colours & sizes...
Smoke Detector with Base & Terminals, for use with Envirograf Fire & Smoke Grilles (Product 34), and Envirograf 240v to 24v Control Units (Product 34).
Hi-Tak Spray Adhesive, a fast acting high-strength adhesive for most substrates and materials, including car and vehicle repairs and refurbishments. 500ml spray can Easy to apply Use with Envirograf Fire Barrier Curtains (Products 56 and 57)
Firetherm Intucompound, a fire-stopping compound for creating a fire barrier and sealing around static joints, services and ducting in walls and floors. Asbestos, fibre and halogen-free Good workability Exceptional yield Easy to mix, with good flow Use in dry internal conditions Can be made water resistant with a suitable coating at...