- On sale!
Envirograf QVFR Premier Clear Top Coat
Envirograf QVFR Premier Clear Top Coat is a specially formulated, quick drying, water based protective top coating for INTERNAL smooth hardwood and softwood surfaces:
- Can be applied by brush, roller or spray
- Available in matt, satin or gloss finishes
- Can be used over Envirograf QVFR Clear Fire Protection Coating
- Low odour
- Quick drying
Envirograf QVFR Premier Clear Top Coat is a specially formulated, quick drying, water based protective top coating for INTERNAL smooth hardwood and softwood surfaces. It can be applied by brush, roller or spray and it comes in matt, satin or gloss finish. It can be used over Envirograf QVFR Clear Fire Protection Coating.
Features & Benefits
- Low odour
- Quick Drying
- Water based polyurethane
- Designed for areas requiring tough and high resistant protection
All surfaces should be clean, dry and free from loose particles and contamination.
Envirograf QVFR Premier Clear Top Coat does not need thinning. Stir well before application. The result is dependent on the condition of the surface and temperature of application. The coverage rate is 10-12m² per litre, for hardwearing areas apply 2 coats.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 10-12m² per litre
- Touch Dry
- 2 Hours
- Brush, Roller, Spray
Be the first to ask a question about this product!
Bollom Flameguard Ultra Gloss is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal for steel. ADVANTAGES Hard wearing gloss finish Top coat for Bollom intumescents for wood and steel Provides Class 0 on non-combustible surfaces
Envirograf HW/CRC Top Coat is a chlorinated rubber top coat for use over Envirograf HW02E Clear or HW01 White Intumescent Coatings in areas of high humidity: Heavy duty single pack coating for use in difficult areas Excellent heavy duty protection Chemical and water resistance Ideal coating for concrete and steel used in difficult conditions such as...
Bollom Flameguard Ultra Vinyl Matt is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal for steel. ADVANTAGES Hard wearing vinyl matt finish Top coat for Bollom intumescents for wood and steel Provides Class 0 on non-combustible surfaces
Nu-Flame FR Colourcoat is a flame retardant finish for walls and ceilings. Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations, demonstrating this water-soluble coating is safe for internal use. Advantages Perfect for walls and ceilings. RAL colour shades. Can also used as a basecoat for use prior to...
Envirograf QVFR Premier Plus Top Coat is a coloured, water-based, hard wearing top coat: Offers a superb finish for application over Envirograf QVFR White Fire Protection Coating Available in matt, satin or gloss finishes Designed as a high quality INTERNAL coating for general use Ready to use, and does not need thinning
Envirograf HW Superb Top Coat is an innovative, water based, high sheen, coloured gloss, for use over HW01 White Intumescent Coating without the need of an undercoat and also on interior and exterior wood: Looks, feels and applies like a traditional gloss Quick drying - reducing application times Low odour and contains less atmospheric...
Nu-Flame FR Acrylic Eggshell is a special formulation for concrete, timber and painted surfaces requiring an eggshell finish. Tested to BS 476 part 6 & 7 and satisfies Class '0' Requirements of current Building Regulations. Advantages Washable eggshell finish RAL colours 14m²/Litre coverage
Envirograf HW Acrylic Top Coat is a coloured, water based topcoat: For use over Envirograf HW01 White Intumescent Coating, ES/VFR White Fire Protection Coating and EP/CP Fire Protection Coating Designed as a high quality internal coating for general use Ideal for plasterboard, lath-and-plaster and as a coating for plaster, masonry, etc. Can be...
Envirograf HW Excel Top Coat is a solvent based product to apply over Envirograf HW01 White Intumescent Coating: No need for an undercoat Available in Satin or Gloss finishes Gives a high quality durable finish for internal & external use Suitable for use on all types of timber substrate