Envirograf HW Easy-Clean Top Coat is a washable and highly durable, coloured acrylic top coat for coating over Envirograf HW01 White Intumescent Coating. Matt and Satin finishes available for interior use on walls, ceilings and woodwork. Ideal for use in kitchens, bathrooms, hotels, hospitals and public buildings.
All surfaces should be clean, dry and free from contamination.
Envirograf HW Easy-Clean Top Coat is ready for use. Stir well before application. Can be applied using brush or roller. Result is dependent on the condition of the substrate and temperature of application. Apply one coat at 10-12m² per litre. If the surface attracts dirt after application, it can be easily washed clean. If two coats are applied at 8-10m² per litre per coat the durability will be increased. Do not apply in temperatures below 10°C or in damp conditions.
Touch dry in 1-2 hours. Recoatable after 4 hours.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Thermoguard Flame Retardant Floor Paint is a heavy-duty, flame retardant coating for interior concrete floors to showrooms, factories, warehouses, workshops, garages, etc. It is a water-based, high durability two-pack epoxy resin coating, designed to withstand vehicular and fork lift truck traffic. The chemically cured coating provides excellent...
Nu-Flame FR Gloss is a gloss flame retardant topcoat paint for new and previously painted surfaces where a gloss finish is required. For use on door, skirting and other timber finishes. Tested to BS 476 part 7 and passes Class 1 surface spread of flame.
Flame retardant topcoat
Envirograf HW Excel Clear is a flame-retardant varnish topcoat that is used as part of an intumescent Envirograf system for timber:
Matt, satin or gloss finishes available
Internal use only
For use over Envirograf HW02E Clear Intumescent Coating
Apply by brush or roller
Nu-Flame FR Undercoat is a gloss flame retardant undercoat paint for new and previously painted surfaces where a gloss finish is required. For use on door, skirting and other timber finishes. Tested to BS 476 part 7 and passes Class 1 surface spread of flame.
Flame retardant basecoat
Bollom Flameguard Ultra Vinyl Matt is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal for steel.
Hard wearing vinyl matt finish
Top coat for Bollom intumescents for wood and steel
Provides Class 0 on non-combustible surfaces
Envirograf HW Ultimate Clear Top Coat is a specially formulated, quick drying, hard-wearing water based protective top coating for INTERNAL use. It can be applied by brush, roller, or spray and it comes in either a matt or satin finish.
Envirograf HW/AG Clear Anti-Graffiti Coating is a clear, quick-drying coating which protects against graffiti of all kinds. Used in conjunction with Envirograf fire protection coatings offers BS476 Class 0 & 1 spread of flame.
Nu-Flame FR Acrylic Eggshell is a special formulation for concrete, timber and painted surfaces requiring an eggshell finish. Tested to BS 476 part 6 & 7 and satisfies Class '0' Requirements of current Building Regulations.
Washable eggshell finish
Envirograf ENV/HS High-Density Clear Lacquer is for use over Envirograf HW02E Clear Intumescent Coating, ES/VFR Clear Fire Protection Coating or QVFR Clear Fire Protection Coating in areas that are subject to high wear.
Envirograf HW Acrylic Top Coat is a coloured, water based topcoat:
For use over Envirograf HW01 White Intumescent Coating, ES/VFR White Fire Protection Coating and EP/CP Fire Protection Coating
Designed as a high quality internal coating for general use
Ideal for plasterboard, lath-and-plaster and as a coating for plaster, masonry, etc.
Nullifire TS815 Solvent-Based Acrylic Top Seal is a single pack, high build modified acrylic topseal conforming to 2010 VOC limits. This product is designed for use with the Nullifire System S range of intumescent basecoats.
Envirograf HW/CRC Top Coat is a chlorinated rubber top coat for use over Envirograf HW02E Clear or HW01 White Intumescent Coatings in areas of high humidity:
Heavy duty single pack coating for use in difficult areas
Excellent heavy duty protection
Chemical and water resistance
Ideal coating for concrete and steel used in difficult conditions such as...