• RSL Resucrete
  • RSL Resucrete
  • RSL Resucrete
  • RSL Resucrete

RSL Resucrete

CRNTB

Resucrete is a three-pack epoxy resin screed for 6mm-9mm thickness that withstands aggressive cleaning methods.

It comes in 2 grades:

Resuscreed HCS (Granite)
Resucrete TS (White)

ADVANTAGES

  • Impervious and anti-slip
  • Abrasion/Impact resistant
  • Low odour
  • Chemical resistant - anti-bacterial/fungus growth
  • Refer to ordering references below - some colours have minimum order quantities as these are made to order, and may have extended lead times
Colour
  • Current colour: Salsa Red
Choose a colour
Close colour picker
  • White
  • Black
  • Salsa Red
  • Stirling Grey
  • Flint Grey
  • Savannah Yellow
  • Kingfisher Blue
  • Marigold
Size
Option
£51.62
VAT excluded

£61.94 Tax incl.
Quantity

Description

Ordering References


Resuscreed HCS (Speckled Granite)

Colour Nearest RAL Match Size Finish Mimimum Order Quantity
Flint Grey RAL 7005 17KG or 34KG Speckled Granite 1
Marigold RAL 1005 17KG or 34KG Speckled Granite 10
Salsa Red RAL 3011 17KG or 34KG Speckled Granite 1
Stirling Grey RAL 7004 17KG or 34KG Speckled Granite 10
Kingfisher Blue RAL 5017 17KG or 34KG Speckled Granite 10

Some colours have minimum order quantities as these are made to order, and may have extended lead times.

Resucrete TS (Speckled White)

Colour Nearest RAL Match Size Finish Mimimum Order Quantity
Black RAL 9017 17KG or 34KG Speckled White -
Flint Grey RAL 7005 17KG or 34KG Speckled White -
Marigold RAL 1005 17KG or 34KG Speckled White -
Salsa Red RAL 3011 17KG or 34KG Speckled White -
Savannah RAL 1032 17KG or 34KG Speckled White -
Stirling Grey RAL 7004 17KG or 34KG Speckled White -
White RAL 9003 17KG or 34KG Speckled White -

Resucrete offers high compressive, flexural strengths and can withstand steam cleaning and high pressure washing, making it a very robust industrial flooring system. Due to its high impact resistance and suitability for floors regularly cleaned by strong, abrasive chemicals, it is ideal for prisons and custodial cells, as well as hotels, bars and breweries

Both grades can be used to form coving up to 100mm nominal height.

Recommended Uses

  • Chemical plants
  • Pharmaceuticals
  • Schools
  • Prisons
  • Food and beverage industries
  • Workshops
  • Commercial kitchens
  • Automotive and aerospace areas

Preparation

New concrete floors: Must be clean, sound, dry, fully cured and surface laitance removed by vacuum enclosed shot blasting, scarifying or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing Make sure all residue detergent is washed and removed by rinsing with clean water.

Existing floors (previously coated): All previous coatings and loose floor paints must be removed by mechanical preparation as described in the above section and primed as specified. If the old resin flooring cannot be removed, then please consult with our technical team for advice on intercoat adhesion and suitability as it may not be compatible with existing floor coating.

Where overcoating other systems such as epoxy coatings or screeds, as part of a specified composite system in the data sheets, please follow the recoat time as stated in the individual data sheets. The coating in each stage should be tack free, but not fully cured. If fully cured then mechanical preparation is required to ensure intercoat adhesion.

Priming

Open and porous substrates may require priming with Resuseal WB, also Resuprime NT may be used as primer on dry substrates only with less than 75% ERH reading. Where the relative humidity of a substrate exceeds 75% ERH, Resuprime MVT should be specified and selected on the basis of hygrometer readings in accordance with BS 8203.

The number of coats to be applied is chosen in accordance with the following table:

ERH % Required Coating Thickness
75-85 1 coat of Resuprime MVT at 200 microns per coat
85-92 2 coats of Resuprime MVT at 200 microns per coat
92-97 3 coats of Resuprime MVT at 200 microns per coat

For further information please refer to recommended individual product data sheets.

Application

The ambient temperatures of the areas should not be allowed to fall below 15°C throughout the application and the curing period, as this could have an adverse effect on the appearance and colour of the system. Surface temperature must be above 10°C. Where possible it is recommended that the application area is heated to a minimum temperature of 15°C ideally, to allow the ambient and substrate temperature to stabilise prior to installation.

Mixing: Pre-mix the coloured base component to a uniform consistency (N.B. The base will appear gelled in the tin but will become fluid with mixing), then mix the entire contents of the base with the hardener. If a separate mixing bucket is being used mix thoroughly ensuring all contents of both components are removed from the buckets supplied. Add the aggregate component slowly whilst mixing. Mix using an electric mixer for approximately two to three minutes until the three components have fully combined. For larger units a forced action mixer may be required to fully combine the aggregate into the resins.

Resucrete should be worked with a trowel or float to achieve a dense, compacted finish. This is best achieved by the application of smooth even pressure in one direction, gradually increasing the pressure as the material compacts and beds down. Over-working the material will draw fines to the surface which may result in resin-rich spots and finish variations.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
CRNTB

Data sheet

Application
Trowel, Float.
Coverage
17kg will cover 1.28 m sq. @ 6mm or 0.85 m sq. @ 9mm
Touch Dry
12-16 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

RSL Resuseal WB

Resuseal WB is a multi-purpose, two-pack, water-based epoxy coating primarily for concrete walls and floors. It can also be applied to concrete poured 7 days prior, as well as wood for a dust-free finish.  Low odour  Silica Free  Superb adhesion  Hard wearing  Hygienic Dust-free Some product colours are made to order and have minimum...

Price £50.53
In stock