Rust-Oleum 5200 Epoxyshield Ultra is a quick-drying single pack water-based floor coating for garage floors, and light to medium duty (normal foot traffic/limited vehicular traffic): Good resistance to diesel, motor oil, coolant fluid, various household chemicals and most types of tyre For concrete floors Easy to apply Touch dry after...
Rust-Oleum Epoxyshield Anti-Slip Additive
Rust-Oleum Epoxyshield Anti-Slip Additive can be added to any of the Epoxyshield Floor Coatings range - Epoxyshield Ultra, Epoxyshield Sealer, Epoxyshield Maxx and Epoxyshield Garage Floor Coating to produce a non-skid surface.
- Non-skid floor additive based on thermally split flint stones
- Formulated for use with Epoxyshield floor coatings
- Can be mixed into coating or broadcast over the final (wet) finish
- Produces a rough, non-skid surface
Rust-Oleum Epoxyshield Anti-Slip Additive
To be added to any of the Epoxyshield Floor Coatings range - Epoxyshield Ultra, Epoxyshield Sealer, Epoxyshield Maxx and Epoxyshield Garage Floor Coating to produce a non-skid surface.
Rust-Oleum Epoxyshied Anti-Slip Additive if broadcast/sprinkled into the freshly applied wet coating should be over coated to encapsulate the additive fully. A coat over the additive will also make cleaning of the finished floor surface significantly easier.
• Non-skid floor additive based on thermally split flint stones
• Formulated for use with Epoxyshield floor coatings
• Can be mixed into coating or broadcast over the final (wet) finish
• Produces a rough, non-skid surface
|Solids content in volume:||100 %|
|Solids Content in weight:||100 %|
- NS200/300: Sparingly: 20 m²/kg (= 200 g/l if mixed in), Dense: 10 m²/kg (= 400 g/l if mixed in)
- NS500: Sparingly: 5 m²/kg, Dense: 2 m²/kg.
Practical usage depends on many factors such as type and amount of contaminants, shape of the substrate and material losses during application.
Directions For Use
Sprinkling: sprinkle the granulates onto the freshly applied, wet RUST-OLEUM coating, manually with a "sprinkler-box" for small areas, or with special low-pressure spraying equipment with a nozzle opening of at least 18 mm ; air pressure between 1 - 3 bars.
Mixing: mix the granulates into the wet coating material and apply the coating with a roller or a brush (not by spraying), stir regularly to avoid settling of the granulates.
For optimum results, follow the application conditions with the applied RUST-OLEUM Floor Coating
For coating systems with a dry film thickness less than 300 µm it is recommended to use NS 200. For 1K-paints, use NS100. Particle size: NS200: 0.2 - 0.5 mm, NS300: 0.5 - 1.0 mm, NS500: 0.8 - 1.5 mm. NS500 is available in white (aluminium oxide) and black (carborundum/iron oxide) - use white for light coating colours and black for darker coating colours.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Approx. 1 pack per 5lt of floor coating.
- Solids by Volume
- 100 %
- Shelf Life (from date of manufacture)
- 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C
- UN Number
- Not regulated
Be the first to ask a question about this product!
Rust-Oleum 5300 Epoxyshield Maxx is a user friendly and easy to apply water-based 2 component epoxy concrete floor coating with an ultimate adhesion and durability: Maximum durability in just 1 coat For medium to heavy traffic Easy to apply, no primer required Long-lasting gloss finish Highly resistant against solvents and chemicals...
Rust-Oleum Epoxy Garage Floor Paint Kit is a 2-part epoxy formula for the ultimate garage floor, saving time and providing an easy clean, showroom-quality appearance on concrete floors. Complete DIY kit including decorative chips/flakes, paint paddle, instructions and DVD One kit covers up to 25m² Durable and time-saving one-coat...
Rust-Oleum 5220 Epoxyshield® Sealer is a one-component, water-based, concrete sealer based on a vinyl acrylic binder: Reduces dust production on concrete Protects against liquid and chemical spills Suitable for garage floors Cost-effective Quick drying and easy to apply
Rust-Oleum Non-Skid Additive NS 200 is a specially selected non-skid additive that can be mixed with the required Rust-Oleum coating system or sprinkled into the freshly applied coating to produce a non-skid surface. Durable aluminium oxide anti-slip additive Resists vehicular traffic Choice of 3 different granule sizes Can be pre-mixed...
Rust-Oleum Non-Skid Additive NS 100 an anti-slip HDPE granulate that turns a standard floor coating into a durable anti-slip coating. It is intended to be added to 1K floor paint to produce a subtle non-skid surface, that is not harmful when falling on the floor and easier to clean than coarse anti-slip floors. Mix with the required Rust-Oleum...
Rust-Oleum Non-Skid Additive NS 500 is a specially selected non-skid additive that can be mixed with the required Rust-Oleum coating system or sprinkled into the freshly applied coating to produce a non-skid surface. Durable aluminium oxide anti-slip additive esists vehicular traffic Choice of 3 different granule sizes Can be pre-mixed...
Remmers Quartz 04/08 is a special combination of washed, fire-dried, quartz sand mixture used as a filler in synthetic resin bound Remmers floor coatings. Grain size approx. 0.4 - 0.8mm.
International Non Slip Aggregate is for use with various International products and helps produce an aggregated non-slip surface where applied. Available in 3 grades: 0.3-0.5mm Quartz (GMA131) 0.5-1.8mm Bauxite (GPA900) 1-3mm Flintag (GMA132).
Sikafloor DecoFiller is available in different colours and is certified as a low emission, synthetic fine filler, optimised for highly decorative flooring systems in combination with Sikafloor 169.
Sikafloor Fibreshield, Fibre Suppressant Dry Shake Floor Hardener. Sikafloor Fibreshield is a preblended, ready to use, fibre suppressant topping for monolithic fibre reinforced concrete floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a wear resistant, smooth surface, providing a reduction in exposed fibres and...
Sika Extender T is an inert, fine, white, fibrous polymer powder used as a thickening agent for certain Sika coating systems. It can be used in combination with Sika Epoxy, Polyurethane and MMA systems. Features and Benefits Allows for viscosity adjustment during Sika resin applications to suit site conditions Economical, easy to mix and...
Jotun Anti-Skid Aggregate is aluminium oxide grains, designed to be spread into the last coat in a non-skid system. Available in extra coarse, coarse, medium and fine particle sizes. Suitable as anti-skid material in a wide range of coating systems in atmospheric environments. Suitable on any type of surface, depending on the specific coating system.
Remmers Ceramix 12 is a special, wear resistant, coloured blinding material to be used as blinding material for anti-slip covers and for the production of mortars and screed mixtures. Spread the material full cover into the fresh base coat. After hardening, remove unbound excess of Remmers Ceramix 03. Image already added
Sikafloor Pronto AP 2 is an adhesion promoter for use with Sikafloor 10 Pronto. Sikafloor 10 Pronto is a 4-part, low-viscosity, fast curing primer based on reactive acrylic resins with enhanced substrate adhesion for the Sikafloor Pronto Modular System.
A specially formulated quartz aggregate to be added to various high build products in our floor coatings range to provide increased 'anti-slip' properties in both dry and wet conditions to improve safety.
Remmers Floormix DQ Aggregate is a special blend of graded decorative colour quartz aggregate for the production of epoxy mortar screeds. Versatile heavy duty epoxy screed system Shrinkage is negligible Tough, impact resistant floor finish Colour stability is vastly superior to polyurethane concrete screed Can be laid at 3 - 4mm and...
Remmers Quartz 20/30 is a light coloured naturally rounded quartz which is washed, dried and graded. Applications include resin systems Concrete Floor screeds Artificial stone General filler Image already added
Remmers Accelerator D40 is a single component liquid catalyst used to reduce the cure period of the PUR Indu Color D40. Enables faster installation of the car park and balcony decking membrane system Localised remedial works can be carried out in a short period of time
Smartkote Protectakote Safety Grip is an additive for Protectakote non-slip coatings which provides improved grip under wet conditions. Protectakote Safety Grip comprises accurately sized sand particles with no dust, fines or aggregations. Can be added to Protectakote at a 20% (m/m) level where wet conditions will be experienced, or where...
Remmers Add 250 is a wear resistant, transparent, chemical resistant polymer granulate. By adding the polymer spheres to liquid sealing materials, transparent as well as coloured, slip resistant sealants can be produced. Image already added Colour-neutral Easy to mix in Polymer granules for producing slip-resistant sealants For...