RSL Resuprime
  • RSL Resuprime

RSL Resuprime

Resuprime is a two-pack, solvent-free epoxy resin bonding and priming coat. It bonds resin-based screeds and toppings to cementitious and other surfaces.

ADVANTAGES

  • Versatile for many types of application
  • Excellent adhesive properties
  • Easy to apply
  • Can be used as a tack coat for screeds
  • No unpleasant or harmful odours
Colour
Size
Finish
£36.61
VAT excluded

£43.93 Tax incl.
Quantity

Description

Resuprime provides excellent adhesion both as a tack coat and primer. Where surfaces are very porous, a coat of Resuprime may be required as a pre-primer coat before a second coat is applied as a tack coat.

For application onto new concrete, or where the RH level is likely to be above 75%, R.S. Dampshield should be applied.

Resuprime is also suitable for priming self-smoothing epoxy resin finishes such as Resuflor and resin based concrete repair products such as Resupatch. Resuprime can also be used as a primer for high build epoxy resin coatings such as Resutop and Resucoat H.B.

Recommended Uses

  • Concrete primer and sealer
  • As a primer for Sherwin-Williams floor coatings and screeds – this includes RSL products.

Preparation

New Concrete Floors: New concrete must be clean, sound, dry, fully cured and surface laitance removed by vacuum enclosed shot blasting or mechanical grinding. A minimum strength of 25N/mm sq. is required.

Existing Concrete Floors: Remove all dirt, oil, grease, old paint or any other surface contaminants by vacuum enclosed shot blasting, scarifying or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing and make sure all residue of detergent is washed and removed by rinsing with clean water.

Local repairs should be carried out with Resupatch or Resuscreed 45.

Existing Floors (previously coated): All previous coatings and loose floor paints must be removed by mechanical preparation as described in the above section and primed as specified. If the old resin flooring cannot be removed, then please consult with our technical team for advice on intercoat adhesion and suitability, as it may not be compatible with the existing floor coating.

Resuprime can also be applied to existing coatings and to other cementitious screeds, which should be clean and sound with an appropriate mechanical key for adhesion.

Priming

Resuprime is suitable for application onto concrete and other substrates where the relative humidity is less than 75% ERH. Hygrometer readings should be done in accordance with BS 8203 to confirm the ERH of the substrate prior to application.

If the ERH is above 75%, then R.S. Dampshield should be used in place of Resuprime.

Application

 The ambient temperatures of the areas should not be allowed to fall below 15°C throughout the application and the curing period, as this could have an adverse effect on the appearance and colour of the system. Surface temperature must be above 10°C. Where possible it is recommended that the application area is heated to a minimum temperature of 15°C ideally, to allow the ambient and substrate temperature to stabilise prior to installation.

Mixing: Pre-mix the base component to a uniform consistency then mix the entire contents of the base with the hardener. If a separate mixing bucket is being used for mixing, ensure all contents of both components are removed from the buckets supplied. Mix using a slow speed electric mixer for approximately two to three minutes until the two components have fully combined.

The mixed unit should be applied immediately by squeegee, roller or brush with a consistent procedure. Floor areas should be cross-rolled to ensure even application and to minimise roller marks. Coverage rates may vary depending on profile and porosity of the substrate.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Application
Brush, Roller, Squeegee
Coverage
5kg will cover 23m sq. @ 200 microns WFT
Touch Dry
8 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

SCHÖNOX SDG PLUS

SCHÖNOX SDG PLUS is a rapid-drying, ready-mixed special dispersion-based damp proof membrane suitable for use on unheated cementitious screeds with increased residual moisture up to 4,0 CM-% (96%-RH). Top Features EMICODE EC 1PLUS: very low emission RAL UZ 113: Environment-friendly, because very low-emission Solvent-free according to...

Price £149.85
In stock

Hydron Nu-Base WB Clear Sealer

Forms the perfect seal on industrial floors and floors which require the reduction of fungal and bacterial growth, such as in hospitals. Advantages Epoxy resin Good resistance to chemicals FeRFA Class Type 1 Reduces fungal and bacterial growth

Price £83.75
In stock

RSL MP Primer

MP Primer is an economic two-pack, high solids epoxy resin primer designed to scratch coat surfaces before applying resin screeds or toppings.  ADVANTAGES Excellent adhesion Versatile for varied application High solids Low odour Image already added

Price £57.53
In stock

707 MMA Metal Primer

A primer exhibiting outstanding adhesion for steel, galvanised steel, aluminium, and unglazed ceramic tiles to be used prior to any of the MMA range of coatings, mortars, and screeds.

Price £85.05
In stock

Remmers Epoxy Quick 100

Remmers Epoxy Quick 100 is a very fast reacting, transparent epoxy resin that is used as a primer, for levelling layers and for the production of compression resistant mortars beneath coatings. Can be subjected to heavy mechanical and chemical loads. Ideal for consumer markets, workshops, fabrications halls, assembly areas, food industry,...

Price £66.60
In stock

Remmers PUR Aqua Top 500 2K M

Remmers PUR Aqua Top 500 2K M is a water based, silk matt, transparent, 2-component sealant with very good resistance to UV and chemicals, extremely little tendency to soil and little susceptibility to scratches and is extremely resistant to hot automobile tyres. A silk matt sealant for all Remmers Epoxy and PUR coatings. Image already added

Price £211.41
In stock

Hydron Mona-Guard Nhance

After spending a generous amount of money on the right coloured brick for your driveway, you are now looking for a robust protective coating, whilst enhancing the natural colour of the paving, the Mona-Guard Nhance is the ideal choice. Other Great Uses Enhances the natural colour of the substrate. Resistance to dirt and stains. Highly resistant to...

Price £69.25
In stock

Sikafloor 161

Sikafloor 161 is an economic two-part epoxy primer, levelling mortar and intermediate layer epoxy resin primer for Sikafloor systems and a binder for Sika levelling mortars and screeds. ADVANTAGES Moisture tolerant Low viscosity Good penetration Excellent bond strength Easy application Short waiting times Solvent-free Multi-purpose

Price £119.26
In stock

Remmers PUR Aqua Top M

Remmers PUR Aqua Top M is used as a matt finish coating on synthetic resin coating systems. This coating is especially suitable as a finish coat in schools, hospitals, car parks and various decorative applications. Flexible, UV resistant, low dirt adhesion, easy to clean, outstanding wear resistance.

Price £277.02
In stock

Thermilate InsOfloor Primer

Thermilate InsOfloor Primer is a unique thermal insulation acrylic primer that is scientifically proven to work. It's energy-saving formula ensures the primer will reflect valuable heat back up into the room, keeping you warmer for longer without increasing your heating system thermostat.

Price £16.50
In stock

Remmers QP Top Plus

Remmers QP Top Plus is a slip-resistant sealant with a very short reaction time used as a sealant in the Remmers QP System. High UV resistance, full curing at temperatures from 0°C, silk gloss surface, can be subjected to mechanical loads, slip-resistant.

Price £347.49
In stock

Remmers Epoxy BS 2000 Transparent New

Remmers Epoxy BS 2000 Transparent is a water emulsifiable, epoxy resin for versatile use, used as an impregnation agent or adhesion promoter in surface protection systems. It can also used as a bonding layer worked wet-on-wet in combination with levelling compounds or epoxy resin systems. Ideal for warehouses, garages, parking garages, balconies.

Price £48.51
In stock

402 WG Damp Proof Coating

402 WG Damp Proof Coating is a fast curing version of 402 Damp Proof Coating designed to be used in lower temperatures or when rapid overcoating/access is required. Developed to function as a rapid curing, residual construction moisture suppressant, to allow the early installation of moisture sensitive flooring in fast track building programmes.

Price £85.05
In stock

Hydron Nu-Base Hydroseal

Nu-Base Hydroseal is the ideal concrete floor sealer to suppress the effect of residual moisture in concrete. For example, if laying down tile flooring on top of concrete, it is first necessary to "seal-in" concrete from moisture, including residual moisture inside the concrete. Ideal for Pubs and clubs Industrial warehouses Dwellings Public...

Price £96.25
In stock

Everbuild 908 DPM

A ready to use, odourless, rubber enriched bitumen emulsion providing a highly effective damp-proof membrane

Price £52.46
In stock

Sika Dustproofer

Sika Dustproofer is a ready to use dustproofer and concrete surface hardener for concrete floors, paths, driveways etc. Sika Dustproofer forms hard insoluble crystals binding together the particles and sealing the surface to form hard impermeable non-dusting concrete and paving. Improves wear resistance, for garage, industrial and workshop floors.

Price £38.96
In stock