Bedec Acrylic Floor Paint
Bedec Acrylic Floor Paint is a specially formulated high build modified acrylic resin floor paint providing a tough finish with excellent durability for interior use.
Ideal as a decorative and protective coating for:
- Hard and soft wood including most types of plastic
Bedec Acrylic Floor Paint has been specially formulated using a combination of high build modified self cross linking acrylic resins, affording the complete solution for commercial and domestic floor coating needs. Suitable for use on wood and concrete floors. Bedec Acrylic Floor Paint protects and enhances the substrate while making the surface easily cleanable and reducing dusting.
Bedec Acrylic Floor Paint is designed as an ideal decorative and protective coating for cement, rendering, concrete, stone, M.D.F., chipboard, hard and soft wood including most types of plastic.
Bedec Acrylic Floor Paint can be applied directly to new concrete and is suitable for metal surfaces when used in conjunction with a suitable metal primer. Also suitable for application to previously painted surfaces finished with solvent based paints.
Features & Benefits
- Water based - Low odour
- One pack - Easy to apply
- Alkali resistant
- Contains a fine aggregate to give anti-slip properties and enhanced grip
- Self priming
- Hard wearing
- Quick drying
- Micro porous
- Interior use only
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Interior / Exterior Use
- Water / Solvent Based
- For Use On
- Cement, Concrete, MDF, Stone, Wood
- Application Method
- Brush, Roller
- Standard / Ready Mixed
- Single, Two or Three Pack
- Pack Size
- 2.5L, 5L, 20L
- Brush, Roller
- 8-12m² per litre
- Touch Dry
- 4 Hours
- UN Number
- Not Regulated
|Jess on 2020-06-17 02:55:41|| |
Hello. Would this be suitable to paint over bathroom floor tiles made of glazed porcelain
This is not suitable for application to porcelain tiles. If you require a bare foot friendly antislip paint we can recommend Smartkote Safekote for this application, please consult the Technical Data Sheet for primer requirements for all substrates.
|Sheila Owen on 2019-03-06 16:38:37|| |
Is this paint suitable for a stone slate floor pls
|Allen on 2019-03-03 08:16:15|| |
Hi does this work on Lino plz as I have got a wet room and I need to change the floor but I have came across this paint I just wanted to no if this is any good to paint the Lino floor in the wet room (shower) as it will get a lot off water on it can you plz advise me before I buy the paint thanks
Bedec Acrylic Floor Paint would not be suitable for this application.
|john roberts on 2019-02-13 20:28:12|| |
Hi, do you have a product that is suitable to paint an interior asphalt floor? If so what colours are available? It is a garage/games room floor. The odd time can get wet. Thanks in advance. John.
We would recommend 313 Acrylic Floor Paint for this application.
|Rebecca on 2018-12-06 19:15:46|| |
Is this floor paint suitable for a bathroom? Is it waterproof? Many thanks.
If the floor is wooden, it can be used however it will not stand up to constant wetness. It would need to be kept relatively dry.
|Tony on 2018-11-21 12:51:52|| |
Would this be suitable for applying to vinyl floor tiles?
No, unfortunately not suitable for vinyl floor tiles.
|Ron on 2018-02-27 17:19:51|| |
Would this paint be suitable for a plywood sheet floor in an artist studio? How many coats will be required from bare wood to fine finish? Is the paint available in gloss finish?
Bedec Acrylic Floor Paint is only available in a satin finish however Blackfriar Professional Acrylic Floor Paint is available in a semi-gloss finish and comes in nearly any RAL or BS colour. To bare plywood, apply directly (after cleaning) diluting the first coat 10% with water, then apply a second coat undiluted.
|Craig on 2018-01-10 19:30:59|| |
Question: Hi, Would this product be suitable to paint over old pine floorboards in a terrace house, do you need to varnish afterwards? Best wishes