Carboline Thermaline 4700 Aluminum

4701S1NL

A single package silicone finish and high-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1000°F (204°C-538°C).

Top Features

  • Resistant to severe thermal shock
  • Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
Colour
Size
Finish
£64.50
VAT excluded

£77.40 Tax incl.
Quantity

Description

Carboline Thermaline 4700 Aluminum is a single package silicone finish and high-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1000°F (204°C-538°C) Colour stability at maximum temperature will depend on colour selected. Requires heat curing.



Top Features & Benefits


  • Resistant to severe thermal shock
  • Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
  • Air-dries to touch (full film formation properties occurs after heat curing)
  • Gloss finish



Preparation & Application


Surfaces must be clean and dry. Employ adequate methods to remove dirt, dust, oil and all other contaminants that could interfere with adhesion of the coating.

Steel
Follow surface preparation for recommended or specified primer. When using direct to steel surfaces abrasive blast to SSPC-SP10 with a 0.5 to 1.5 mil (12-37 microns) surface profile.

Aluminium
Sweep blast cleaning (SSPC-SP7) is recommended.

Stainless Steel
Abrasive blast to achieve a 0.5 to 1.5 mil (12-37 microns) surface profile.

Mixing & Thinning
Power mix until uniform in consistency. Avoid excessive air entrapment.

Thinning is normally not required. May be thinned up to 32 oz/gal (25%) by volume with Thinner 235 for “hot” applications exceeding 150°F (66°C) and for mist coating. May be thinned up to 16 oz/gal 12% by volume with Thinner 10. Use of thinners other than those supplied or recommended by Carboline may adversely affect product performance and void product warranty, whether expressed or implied.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
4701S1NL
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Carboline Carbomastic 19 AL

An aluminium-pigmented high solids mastic with excellent barrier and corrosion resistance. Carbomastic 19 AL is specifically designed for maintenance operations and has a high aluminium loading. Top Features Suitable as a topcoat for most tightly adhering existing coatings Contains 9 % aluminium by weight in the dry film Can be used as a...

Price £76.88
In stock

International Interzone 954 (Rapid Cure)

International Interzone 954 (Rapid Cure) is a faster drying version of Interzone 954 to be used in tidal areas where immersion will be rapid. Designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp...

Price £98.71
In stock

Jotun Marathon 1000 GF

Jotun Marathon 1000 GF is a two component polyamine cured epoxy coating. It is a high build, solvent free, glass flake reinforced product. It has very good impact and abrasion resistance. Suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. Can be used as primer, mid coat, finish coat or as single coat system in...

Price £245.92
In stock

1805 High Build Vinyl Finish

A quick drying, vinyl acrylic, anti-corrosive, primer-finish formulated for direct application to degreased galvanised steelwork without the need for a primer. 

Price £58.22
In stock

PPG NovaGuard 4701

PPG NovaGuard 4701 is a two-part glass flake vinylester primer for concrete and steel as a holding primer for Novaguard 4801. Suitable for service temperature >80°C (176°F) when overcoated with NOVAGUARD 4801 dependent on the actual environment. Mixing ratio by volume: base to catalyst 98:2

Price £405.60
In stock

Jotun Penguard Pro GF

A glass flake reinforced, abrasion resistant epoxy coating that is surface tolerant, fast drying, high solids and high build. Specially designed for areas where increased abrasion and impact resistance is needed such as decks, walkways and landing areas.

Price £48.35
In stock

Carboline Thermo-Lag 3000-SP

A two component, 95% solids epoxy based intumescent coating for the fire protection of structural steel. Designed to fireproof steelwork for up to a 4 hour fire rating. Top Features UL listed - for both interior and exterior environments Durable finish Thin film coating VOC compliant Easy repair

Price £882.30
In stock

Jotun Penguard Express CF

Jotun Penguard Express CF is a two component polyamide cured, colour stable epoxy primer/finish coating that is fast drying, high solids and high build. It can be used as primer, mid coat or finish coat in atmospheric environments and is specially designed for new construction where fast dry to handle and over coating times are required.

Price £159.07
In stock

International Intergard 345

International Intergard 345 is a two component, low VOC, high solids, fast curing epoxy primer/finish containing zinc phosphate anti-corrosive pigmentation. Suitable for use as a one or two coat primer/finish coating or as an intermediate over recommended anti-corrosive primers.

Price £294.84
In stock

Jotun Marathon 500

A surface tolerant from Jotun that is a high build epoxy coating suitable for environments with very high corrosivity, such as areas in the splash or tidal zones. Jotun Marathon 500 is a two component polyamine cured epoxy coating. It's a surface tolerant, high solids, high build product that will continue to cure even when immersed in water.

Price £214.50
In stock

Carboline Thermaline 450 EP

A high performance immersion-grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. It is typically used on hot steel substrates under insulation operating continuously up to 400°F/204°C. Top Features Continuous temperature resistance to 204°C Very good flexibility Acceptable for use...

Price £130.80
In stock

Carboline Polyclad 777 Fast-Set

A high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Top Features Fast curing rate increases throughput Excellent abrasion resistance Compliant with AWWA C222 Compliant with EN 10290 This product is available as POA. Click here to email us...

In stock

Jotun Jotacote Universal N10

Jotun Jotacote Universal N10 is specially designed as a universal, all round, all year, new building coating where fast dry to handle times are required. Jotun Jotacote Universal N10 can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments and is replacing the current Jotacote Universal product.

Price £146.02
In stock

Carboline Phenoline 353 LT

A highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargos like ethanol, gasolines, gasoline blends, biodiesel, fuel oils, and others. Top Features Outstanding overall chemical resistance Excellent...

Price £180.75
In stock

Sikalastic 844 XT

Sikalastic 844 XT is a two part, elastic, very fast curing modified polyurea spray applied membrane where exposure to high acidic and alkaline chemical concentrations are present.  Features and Benefits: High acidic and alkaline chemical resistance High resistance to microbial waste and biogenic sulphuric acid Fast reactivity and cure...

Price £12,283.37
In stock