Blackfriar Matt Black Paint
Perfect for when you need a dead black matt surface. Its non-reflective finish makes it ideal for all interior surfaces such as old beams, panelling, decorative ironwork, stage scenery and darkrooms. To be used on wood and metal.
Blackfriar Matt Black Paint is perfect if you need a dead black matt surface. Its non-reflective finish makes it ideal for all interior surfaces such as old beams, panelling, decorative ironwork, stage scenery and darkrooms. It can be used on wood and metal.
Features & Benefits
- For wood, metal and plaster
- Interior use
- Matt finish
- Typical Coverage (per coat)
- 14m² per litre
- Touch Dry
- 16 Hours
- Brush, Roller, Spray
Be the first to ask a question about this product!
A high quality bituminous solution for marine, industrial and agricultural applications. It forms a waterproof, weatherproof, corrosion resistant coating for interior and exterior use.
A high build, high obliterating water based matt finish suitable for use on internal walls and ceilings. Designed to infill blockwork and brickwork and cover most surfaces in just one coat.
Ardenbrite Metallic Paint (Water Based) is a beautiful and hardwearing water-borne metallic finish for interior and exterior use. The solvent-based finish with more gold, silver and bronze shades is available at Rawlins Paints, here.
Rust-Oleum's Doodle Wall is a smooth, hard finish that creates a unique, white, writeable-erasable surface. Once dry, simply use dry wipe markers to draw or write messages and then erase. Application is easy and it has minimal odour making it safe to use indoors. Ideal for use on painted interior surfaces such as: Plasterboard, Hardboard,...
Thermilate Thermalmix Paint Additive is a revolutionary paint additive that makes almost any paint or coating insulate. It cuts down energy use and reduces heat loss through walls and ceilings, therefore helping to reduce energy bills. Thermilate Thermalmix Paint Additive has been independently tested and scientifically proven to work by world...
Sika Igolflex 201 is a two-part, thick layer, solvent-free, fibre reinforced polymer modified bitumen emulsion coating. To be used in the waterproofing of all types of below ground concrete structures, waterproofing of wet room floors and balconies and as an adhesive to bond light weight thermal insulation boards.
Rust-Oleum Chalkboard Paint creates a tough, scratch resistant finish that allows you to create a writeable / wipeable chalkboard surface on a wide range of substrates. This paint is suitable to use both outdoors and indoors. We also stock Magnetic Chalkboard Paint from Rust-Oleum.
A special preparation suitable for gilding work and as a mixing varnish. Used when applying gold leaf. When planning to apply a valuable, decorative gold leaf finish, the preparation is essential. ADVANTAGES Protects ornate work Ideal for gold leaf application Mixing varnish Apply direct Gloss finish
Teamac Acrylic Coating is a cost-effective product to protect, refresh and decorate surfaces and substrates: Tile and brick roofs Sealing asbestos sheets Corrugated asbestos roofs on agricultural buildings and barns General areas (not floors) of masonry, wood, rendering and plasterwork Red, grey, or green low sheen finish on asbestos sheets, brick...
Specifically formulated for painting new or old blackboards, it is ideal for use in pubs, restaurants, play areas etc. and produces a chalkboard surface in no time. Its durable matt black finish resists ghosting allowing for clear, legible chalk writing and easy cleaning.