"

Rust-Oleum Non-Skid Additive NS 200

Specially selected non-skid additive that can be mixed with the required Rust-Oleum coating system or sprinkled into the freshly applied coating to produce a non-skid surface.

Read Full Description

More details

£9.48 + VAT

Rust-Oleum Non-Skid Additive NS 200 is based on thermally split flint stones and is intended to be added to floor coatings to produce a non-skid surface. Rust-Oleum Non-Skid Additive NS 200 can be used in combination with the following Rust-Oleum Floor coatings:

Rust-Oleum Non-Skid Additives can be mixed with the required Rust-Oleum coating system or can be sprinkled into the freshly applied coating manually or with special low pressure spraying equipment. Rust-Oleum Non-Skid Additives are intended for Non-Skid industrial flooring and should be topcoated with the required Rust-Oleum System if sprinkled.

Directions for Use

Sprinkling: Sprinkle the granulates onto the freshly applied, wet Rust-Oleum coating, manually with a "sprinkler-box" for small areas, or with special low-pressure spraying equipment with a nozzle opening of at least 18mm; air pressure between 1 - 3 bars.

Mixing: Mix the granulates into the wet coating material and apply the coating with a roller or a brush (not by spraying), stir regularly to avoid settling of the granulates.

Note: For coating systems with a dry film thickness less than 300μm it is recommended to use NS 200.

Coverage:

  • Sparingly: 20 m²/kg (= 200 g/l if mixed in)
  • Dense: 10 m²/kg (= 400 g/l if mixed in)

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

NS200 + NS300 TDS

Download

NS200 + NS300 MSDS

Download