"

Thermilate PRO Drive Block Paving Sealer

Thermilate PRO Drive Block Paving Sealer View larger
Typical Coverage (per coat)2 - 3m² per litre
Touch Dry2 Hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Thermilate PRO Drive Block Paving Sealer is a high quality, clear block paving sealer and joint stabilising product that is suitable for most types of block and cobble paving, except clay.

Read Full Description

More details

£110.98 + VAT

Block Paving Sealer from Thermilate PRO

Thermilate PRO Drive Block Paving Sealer is a high quality, clear block paving sealer and joint stabilising product that is suitable for most types of block and cobble paving, except clay. To minimise possible adverse effects of moisture, where possible it is best to re-sand the block paving joints and apply both coats of Thermilate PRO Drive Block Paving Sealer on the same day. Once sealing is complete do not walk on for approximately 2 hours with no vehicular access for 24 hours.

Thermilate PRO Drive Block Paving Sealer is designed to be re-applied as and when required. To keep in optimum condition a top-up coat is generally advisable every 2-5 years. The paving should be clean and free of grease, oil, dirt and other contamination before any application.

Features & Benefits

  • Rejuvenates old paving.
  • Easy to apply with sprayer or roller.
  • Protects against loss of colour through UV light.
  • Resists oil and stain penetration.
  • Inhibits weed and algae growth (BS5750/ISO9000 quality approved material).
  • For optimum results apply two coats.
  • Suitable for most patio slabs & block paving.
  • Click here to view more Themilate PRO products.

IMPORTANT: If you are a professional contractor please call 0113 2455450 or email [email protected] for special rates on this product and to find out more about becoming an approved applicator.

Send us your question

Question

What is the expected coverage of the block paving sealant

Mr P Buck from ipswich (uk) - 14/08/16

Answer

2 - 3m² per litre/per coat. This means a 25lt will cover 50 - 75m² in one coat, two coats are recommended for optimum results.

Dose this block sealer need to be removed with a solvent after several years in order to apply another coat?

Tony from Chelmsford (UK) - 23/05/16

No, the paving should be clean and free of grease, oil, dirt and other contamination before any application of any further coats but any existing Thermilate PRO Drive Block Paving Sealer does not need to be removed first.

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

PRO Drive Sealer TDS

Download

PRO Drive Sealer MSDS

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.