Remmers Salt IH (Salt Inhibitor)


Remmers Salt IH (previously Salt Inhibitor) is a restoration preparation for encapsulating masonry salts. The main field of application is for the restoration of masonry work that contains damaging salts - chlorides, nitrates and sulphates. 

  • Penetrates into the surface of treated building materials.
  • Creates a water repelling zone that interrupts the transport of salts.
  • Strengthens
  • Equalises absorption capacity

This product is subject is to a 7-10 day lead time.

VAT excluded

£51.19 Tax incl.


Remmers Salt IH (previously Salt Inhibitor) is a water soluble impregnation agent that is used to treat destructive masonry salts, especially nitrates and chlorides. It penetrates into the surface of treated building materials, creating a water repelling zone that interrupts the transport of salts thereby reducing the damaging pressure caused by crystallisation – through encapsulation of the masonry salts. Vapour permeability is essentially maintained. Through the deposit of silica gel, additional strengthening is achieved on friable masonry work.


Clean tools with water while the material is still fresh.


If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

This product is subject is to a 7-10 day lead time.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Suitable Substrates
Brush, Spray
0.4 - 0.6 kg/m²
Recommended Thinner/Cleaner
1.1 g/cm³
Shelf Life (from date of manufacture)
12 months
UN Number

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields