Tor White Aluminium Oxide Grit (SS5001030 / SS5001050) is a wear resistant aggregate for the enhancement of slip resistance in Elastadeck balcony coating systems. Available in 30 and 50 mesh sizes.
Thermilate PRO Roof Primer
Thermilate PRO Roof Primer is a water-based primer specially formulated to prepare clay roof tiles for painting with Thermilate PRO Insulating Roof Coating. Thermilate PRO Roof Primer aids adhesion by producing a bond between clay roof tiles and Thermilate PRO Insulating Roof Coating to avoid flaking or peeling.
Thermilate PRO Roof Primer is a water-based primer specially formulated to prepare clay roof tiles for painting with Thermilate PRO Insulating Roof Coating. Thermilate PRO Roof Primer aids adhesion by producing a bond between clay roof tiles and Thermilate PRO Insulating Roof Coating to avoid flaking or peeling. To get the best results make sure surfaces are clean and dry, when the surface has been fully prepared, apply one coat of Thermilate PRO Roof Primer. When fully dry, apply 2 coats of the Thermilate PRO Insulating Roof Coating.
Thermilate PRO Roof Primer when cured, is a colourless, low odour single component, low viscosity primer that cures quickly enabling rapid overcoat times. Its unique formulation make it easy to apply and achieve an even and seamless finish. Thermilate PRO Roof Primer is ideal for clay tiles, weathered slate, concrete, stone and more, it can even be applied to damp surfaces.
Features & Benefits
- Single component - spreads easily, cures quickly for rapid over-coating.
- Superior moisture resistance aids year round use.
- Higher strength & better chemical resistance than traditional sealer’s.
- Stops oil & other stains & incorporates a UV filter.
- Improved impact & abrasion resistance - prolongs performance life.
- Reduces and eases routine maintenance.
- Ease of future refurbishing without the need to strip
IMPORTANT: If you are a professional contractor please call 0113 2455450 or email [email protected] for special rates on this product and to find out more about becoming an approved applicator.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Tor Elastascrim FT (SS6000140) is a non-flammable, semi-elastic, putty-like butyl rubber based strip encapsulant/sealant. Supplied in roll form on siliconised paper release backing for use as a formable pre-coat encapsulant and sealant over roof sheet bolts etc. Also usable as a lap joint gap filler/sealer on sheeted (profile metal, fibre-cement etc)...
GacoFlex E5320 2-Part Epoxy Primer/Filler is a two-component, water-based epoxy primer that is ideal for use on most roofing surfaces including metal roofs and flashings. This easy-to-apply primer bonds to properly prepared roofing surfaces and improves adhesion of GacoFlex silicone coatings and other top coats, especially on weathered...
Strong roof trims that produce a beautiful finish with pre-made corners that allow effortless change between a raised edge and drip detail. Made using "E" type glass reinforcement encapsulated in thermo set polyester resin to give outstanding life expectancy and performance.
Eagle Wet Primer is a solvent-free resin with low viscosity, applying in a single layer to increase adherence of waterproofing systems - use with Desmopol membranes, even on concrete or mortar substrates with high residual moisture.
A specially-formulated primer for application on to metals to enhance adhesion properties, and allow the primer to physically bond onto the metal using an incorporated activating acid that "etches" into the substrate. Advantages For Aluminium, Copper and Galvanised Steel surfaces. White in colour. Upto 12-months shelf life.
Sika MultiSeal is a self-adhesive sealing tape made from bitumen rubber compound, protected by a reinforced aluminium film. Use for general repair to existing flashing, roofs including sheet metal work, facades, broken roof tiles, leaking gutters, duct work, sealing projections through the roof. Very easy to apply, cold applied, self-adhesive, good...
Gaco Roof Tape is a self-adhesive seam tape made of cross linked polymers of butyl and E.P.D.M. rubber, coated on fleece backing. Gaco Roof Tape maintains its elasticity and splice integrity when subjected to severe ultraviolet rays, thermal shock, ponding water, and extremely low temperatures.
Tor Raincoat APA (RC353) is a single pack coating based on a specially modified acrylic resin system containing anti-corrosive pigments and inert extenders. Tor Raincoat APA is an adhesion promoting and anti corrosive intermediate coating for use in conjunction with Raincoat roof coatings and cladding finishes over PVDF and other plastic coated substrates.
Tor Elastaprime (RC100) is a high performance universal primer that provides excellent binding and adhesion to most substrates including plastics, wood, mineral substrates, ceramic tile, copper, zinc, brass, steel, galvanised steel, aluminium etc. Tolerant of low temperature/high humidity conditions. Used in conjunction with Tor Elastaseal, Elastadeck and...
Tor Elastaseal Z Binder Sealer (RC144) is a two component, moisture curing polyurethane resin solution for use as an all-aliphatic stabilising sealer and primer on a wide range of substrates such as concrete, asphalt, bitumen, felt, asbestos, plaster, render, etc.
Eagle Preformed Corners (Drip and Non-Drip) for roofs, aiding or restricting water runoff for use in domestic and industrial applications. Available in different configurations to suit all projects - see images below for approximate dimensions.
Developed to meet the demand for a quicker yet still penetrating single pack primer. Bullet Roof Quick Prime is ready to be overcoated in as little as 20 minutes. Suitable for most roof substrates including, concrete, wood and bituminous membranes. Top Features Colour: Amber Solids: 46% by weight ,40% by volume Theoretical consumption:...
Sika Flexitape Heavy Duty is used for additional partial reinforcement under Sika Reemat Premium on cracks/joints subject to movements of >15% (expansion joints) and to bridge smaller seams between different substrates. Expansion joints require special advice with a release adhesive tape.
Tor Elastaseal FIA (Foaming Insulation Adhesive) is a fast curing polyurethane based aerosol foaming adhesive, applied by special aerosol gun, it meets Fire Class B1. Elastaseal FIA should be used for the bonding of roofing insulation boards to roofing substrates and membranes including asphalt, felt, vapour control layers, aged single ply membranes, etc.