Timberex Satin Oil Gold
Used for periodic maintenance of floors treated with Timberex Gold, Timberex Free or Timberex Wax-Oil. A deep penetrating, hardening natural oil that is labour efficient and re-sanding is not normally necessary.
Timberex Satin Oil Gold is used for periodic maintenance of floors treated with Timberex Gold, Timberex Free or Timberex Wax-Oil. Re-sanding is not normally necessary.
Features & Benefits
- Labour-efficient, easy and rapid maintenance
- Deep-penetrating, hardening natural oil
- Surface-dry after 2 - 4 hours, thoroughly hardened and water-resistant after few days
- Can be buffed to a high sheen if desired
- VOC 2010-compliant and EN71-3 Certified (Food- and Toy-safe)
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Jotun Trestjerner Parkettlakk is a quick-drying, high quality, water-borne polyurethane clear varnish with low odours for use on wooden laminate/parquet floors. It has a high resistance to wear and scratches and a good chemical resistance. The product adheres well to the flooring enhancing the appearance, and it contains a UV-filter against yellowing.
A range of water-based grey stains that penetrate deep into the wood for a lasting grey ‘weathered wood’ look. Only need to apply once, then a topcoat can be applied.
A virtually solvent-free product made from natural, fast-drying oils and resins which penetrate deeply into the wood. Filling and enriching the pores it cures to seal and protect from within
Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s Resistant...
Used for periodic maintenance of floors treated with Timberex Natural, Timberex Heavy Duty or Timberex Coloured. Available in natural or white, re-sanding is not normally necessary.
Offers a compromise of a tradtional oil and a coating with superior protection against spillages. It greatly enhances colours and grain and allows wood to age naturally into rich varying tones.
Coo-Var Clear Glaze for Wooden Floors is a water-thinned, fast drying, low odour coating ideal for wooden floors to provide a quick drying and protective clear coat. ADVANTAGES Quick drying Protective, clear coat Domestic/Commercial use Low odour
A low-VOC wood oil for protection against stains and wear. Very rapid curing saves time and costs. Non-yellowing, non-darkening and easy to maintain and clean. Can be used as a Topcoat for Timberex Aqua and Active Stain.
Blackfriar Heavy Duty Varnish is a two-pack wood and concrete varnish that protects and transforms floors and work surfaces with a tough, hard wearing and professional finish. Touch dry in 2 hours and hard dry in 8 hours, this product is for internal use.
Timberex Wax-Oil greatly enhances colours and grain and allows wood to age naturally into rich varying tones. Made from fast curing natural oils and carnuba wax it cures to a deep satin finish.
Coo-Var Polyurethane Clear Floor Coating is an oil based clear wood floor varnish which gives a hard glaze to protect most wooden floors and provide an easy to clean surface.