Sub-category links
Filter By
Brand
Brand
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Min. Application Temperature
Min. Application Temperature
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
There are 29 products.
Active filters
Jotun Penguard Express MIO is a two component amine cured epoxy coating that is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in...
£74.02 (incl. VAT)
£61.68 (ex. VAT)
A two component amine cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments.
£72.12 (incl. VAT)
£60.10 (ex. VAT)
Jotun Penguard Low Temp Additive is recommended when a faster curing or painting at lower substrate temperatures. This is an additive for improved low temperature curing of the following products:Penguard HBPenguard PrimerPenguard Special
£7.18 (incl. VAT)
£5.98 (ex. VAT)
Sherwin-Williams Macropoxy M902 (formerly known as Epigrip M902) is a low temperature curing hi-build 2-pack epoxy brushing aluminium primer coating capable of curing down to 0°C. For brush application onto hand or mechanically prepared surfaces and/or damp gingered surfaces giving excellent wetting and adhesion characteristics - see...
£74.22 (incl. VAT)
£61.85 (ex. VAT)
Sherwin-Williams Macropoxy M905 (formerly known as Epigrip M905) is a low temperature curing, two pack epoxy high build undercoat, capable of curing down to 0°C.For application onto suitably primed surfaces, as an undercoat for use under suitable high performance finishes, where low temperature curing is required Recommended for rapid...
£141.95 (incl. VAT)
£118.29 (ex. VAT)
A two-component resin modified epoxy paint containing anti-corrosive pigments that can be applied at sub-zero temperatures as a primer or an intermediate coat on surfaces exposed to climatic, mechanical and chemical stress.Recommended for building frameworks, tubular bridges, conveyors and other steelwork and equipment Adheres well to...
£510.80 (incl. VAT)
£425.67 (ex. VAT)
Tikkurila Temacoat SPA Primer MIO, a two-component resin modified epoxy paint containing micaceous iron oxide, used as a primer or an intermediate coat on surfaces exposed to climatic, mechanical and chemical stress.Good adhesion to steel, zinc and aluminium surfaces Recommended for building frameworks, tubular bridges, conveyors and...
£413.69 (incl. VAT)
£344.74 (ex. VAT)
Tikkurila Temabond WG 200 is two-component, low temperature curing, aluminium pigmented high-solids modified epoxy metal paint.Good chemical, solvent and abrasion resistance, due to the aluminium pigments Especially used as a primer for steel surfaces difficult to clean in process and chemical industry and in water immersion Excellent...
£264.78 (incl. VAT)
£220.65 (ex. VAT)
Jotun Penguard WF WG is a two component, anti-corrosive water borne epoxy coating that is a versatile, fast drying product containing flash rust inhibitors. It cures down to 5°C and is specially designed for new construction where fast dry to handle and over coating times are required. Note: Grey XO is made to order and has a minimum order...
£343.86 (incl. VAT)
£286.55 (ex. VAT)
Axalta ViterShield SPF Epoxy Primer/Finish is a two-pack epoxy, mid-sheen primer/finish for blast cleaned steelwork.Low temperature curing (down to 0ºC) and low tendency to bloom Use as an anticorrosive primer/undercoat or primer/finish for general structural steelwork High build airless spray capability Good resistance to undercutting...
£52.13 (incl. VAT)
£43.44 (ex. VAT)
International Intershield 300HS is a high-solids, abrasion resistant, aluminium pure epoxy coating providing excellent long term anti-corrosive protection and low temperature capability.High solids version of International Intershield 300 A universal primer which can be applied directly to mechanically prepared shop primer or suitably...
£794.51 (incl. VAT)
£662.09 (ex. VAT)
Tikkurila Temacoat EP Primer, a two component epoxy primer containing zinc phosphate, with excellent adhesion to steel and zinc surfaces.Can be used as a primer or an intermediate coat on epoxy and epoxy-polyurethane systems Rapidly recoatable For industrial and professional use onlyMore Information Delivery Info
£293.46 (incl. VAT)
£244.55 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Min. Application Temperature
Min. Application Temperature
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
