Sub-category links
Filter By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Usages
Usages
Base Type
Base Type
Application Method
Application Method
Touch Dry (at 20°C)
Touch Dry (at 20°C)
Industry Approved System
Industry Approved System
Non - Isocyanate
Non - Isocyanate
There are 859 products.
Active filters
Hempel Silvium 51570 is an oleoresinous general purpose aluminium topcoat with good heat resistance and good light reflection. Complies with EU Directive 2004/42/EC, subcategory i.Recommended as a finishing coat for protection of hot pipelines, exhaust pipes, smokestacks and other hot surfaces on steel and woodwork in mild to moderately...
£56.26 (incl. VAT)
£46.88 (ex. VAT)
Hempaxane Light 55030 is a two-component, high-solids, glossy, polysiloxane enamel with excellent gloss and colour retention.Isocyanate free glossy decorative and protective finishing coat for structures in severely corrosive atmospheric environment Service temperature - Maximum, dry exposure only: 120°CFor professional use only....
£261.00 (incl. VAT)
£217.50 (ex. VAT)
Hempathane Fast Dry 55750 is a 2-component polyurethane paint. Cured with aliphatic isocyanates. Good gloss retention and colour stability. Contains zinc phosphate.Recommended as a high-build solution for protecting steel structures, in compliance with VOC regulations May be specified as a one-coat direct-to-metal system in corrosive...
£67.06 (incl. VAT)
£55.88 (ex. VAT)
Hempel's Silicone Acrylic 56940 is a heat resistant acrylic modified polysiloxane paint, which is air drying at ambient temperature.For long-term protection of hot pipelines, exhaust pipes, smoke stacks and other hot surfaces up to 200°C Resists short time exposure up to 300°C Service Temperature:Maximum, dry exposure only: 200°C...
£114.30 (incl. VAT)
£95.25 (ex. VAT)
Hempinol 10220 is a physically drying, high-build, bituminous coating.For inexpensive short to medium-term anticorrosive protection of interior and exterior steelwork not exposed to direct sunlight. Not resistant to continuous mechanical stress EC-type examined as a low flame spread material when used as part of a predefined paint system...
£49.06 (incl. VAT)
£40.88 (ex. VAT)
Single pack solvent-based elastic coating for application at low temperatures and damp conditions.Ultimate corrosion protection - protects against cracking and peeling 7 colours available, including anthracite grey UV-and impact-resistant Primer and topcoat in one Excellent resistance against chemical agents in the atmosphere...
£160.38 (incl. VAT)
£133.65 (ex. VAT)
A solvent-based acrylic varnish used for the protection of non-ferrous metals and renovation of transparent skylights (except for polycarbonate). Alkali resistant Excellent flexibility and high weather resistance Transparent - completely colourless and non-yellowing Do not apply Vernac Gloss as floor varnish or on places that are...
£87.04 (incl. VAT)
£72.53 (ex. VAT)
Coo-Var Water Based All Metals Primer is a water thinnable acrylic metals primer which has very good anti-corrosive properties. It is low odour and easy to apply to most metals.Water based primer Interior and exterior Suitable Surfaces: Most Metals Inc. Iron, Steel, Aluminium, Brass, Copper Finish: Matt Application: Brush, roller or...
£19.90 (incl. VAT)
£16.58 (ex. VAT)
For internal and external use on a wide range of substrates and surfaces, suitable for overcoating with many topcoats.Low odour, water-based single pack primer Based on a special acrylic emulsion pigmented with inorganic pigments and extenders Apply by brush, roller or sprayer Touch dry after 2 hours - leave for 16 hours before...
£134.12 (incl. VAT)
£111.77 (ex. VAT)
A modified acrylic, high build primer-finish for galvanised surfaces.Can be applied by brush or spray and is touch dry in 1 hour
£82.18 (incl. VAT)
£68.48 (ex. VAT)
A single pack high build primer for blast/manually cleaned steel. An excellent lead and chromate-free anticorrosive.Protective primer for steel A urethane alkyd binder with zinc phosphate anti-corrosive, together with inert inorganic pigments and thinned with low aromatic white spirit Good coverage - 6.45 square metres per litre Applies...
£340.69 (incl. VAT)
£283.91 (ex. VAT)
Axalta Modified Vinyl Primer/Finish (previously Stokes Modified Vinyl), a vinyl one coat anti-corrosive primer/finish for steelwork and galvanised steel where a one coat*, sheen primer/finish is required.Can be applied to degreased new galvanising without the need for an etch primer Use for gates, fences, street furniture and structural...
£84.61 (incl. VAT)
£70.51 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Usages
Usages
Base Type
Base Type
Application Method
Application Method
Touch Dry (at 20°C)
Touch Dry (at 20°C)
Industry Approved System
Industry Approved System
Non - Isocyanate
Non - Isocyanate
Metal primers and rust-inhibiting undercoats provide the crucial stage to any major maintenance, renovation and metal restoration work. Whether it is for cladding, roofing, floors, mezzanines, helipads, steel and cast-iron structures, or oil tankers, metal primers are available to buy here today, in combination with other products and topcoats required to finish a major build or small project, in almost any working and environmental conditions.
Direct to metal paints are the quickest and easiest way to cover rust, or deliver high-quality finishes to areas with minimal surface preparation. Some of the better known direct-to-metal products include coatings from Rust-Oleum’s CombiColor and Noxyde ranges.
Metal topcoat finishes can either be used to complete full paint systems, or refinish any maintenance or repair work that has been done. Aluminium paints, high-gloss finishes for increased durability in high-humidity environments, enamel and gold-effect or metallic finishes are popular specialist metal topcoats that deliver much improved results over standard coatings.
Heat resistant paints for metal are not the same as intumescent paints for steel. Heat resistant paints have been specifically designed to withstand high-heat temperatures up-to 750°C – for use on chimneys, pipes, engines, log-burners, and exhaust pipes, etc. They will not break down under duress of high-temperatures, and the products available to buy today at Rawlins Paints are designed for commercial and industrial use.
Metal cladding paints can rejuvenate and re-colour aged and weathered cladding. As businesses re-brand, so do colour schemes – which using a high-quality metal cladding paint can mean that the façade to a business property can be relaunched extremely quickly.
Teamac, International, Jotun and Sherwin-Williams are amongst the specialist manufacturers producing high-grade marine paints and coatings for boats, yachts, cruisers, trawlers, etc. These metal paints are designed to protect metal surfaces in submerged environments, and even in ice-cold Arctic conditions.
Whilst many metal paints can be applied by brush, roller and spray, Rawlins Paints also stock aerosols for use on metal and metallic surfaces and substrates – from primers to topcoats. Rust-Oleum Hard Hat Topcoats are the number 1 best-selling industrial aerosols for metal, delivering high-quality gloss finishes with superb colour retention.
In more extreme corrosive and industrial environments, including power stations, oil refineries, pulp and paper plants, gas pipe infrastructures, chemical processing plants, aviation sites and hangers, low temperature coatings may be required. Tank coatings and linings available also provide industrial solutions for internal and external surfaces of tanks storing gas, water or aviation fuel. A wide range of metal paints do provide above standard chemical resistance, but the range of specialist chemically resistant coatings also available at Rawlins Paints offer extreme protection to concrete, metal and other building and storage facility substrates dealing with corrosive chemicals, acids and materials on a daily basis.
Easy Maintenance
A series of easy to use products that require no specialist skills to apply, for day-to-day maintenance of metal. The products require minimal surface preparation, are quick drying and are usually sufficient with just one or two coats.
High Performance
This range offers products that offer longer term protection against more demanding conditions such as, extreme corrosion, chemicals, impact and abrasion, coastal environments, etc. These systems often include multiple coats and products, more stringent preparation requirements and more need for care to be taken over application.
Our help and advice promise
Call our Technical Team to discuss which area your project falls into and what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.
