Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Exterior-use metal paints from manufacturers including Rust-Oleum, Mathys, Coo-Var, Teamac, Jotun, Everbuild, Solignum, International, Sherwin-Williams, Cromadex, and Sika, are designed for commercial and industrial applications. Providing long-lasting weather and UV protection, rust and corrosion resistance, superb colour retention - even in submerged environments - and high-temperature resistance, the selection of high-end direct-to-metal paints and coatings listed below are ideal for the marine sector, power and industrial processing plants, factory and warehouse use, offshore builds and locations, plus much more. For in-depth product specification and application information, please refer to product data sheets, or contact a member of our Technical Support team.
There are 11 products.
Active filters
As a single coat polyaspartic primer finish, International Intercure 99 can replace two coat systems for ISO 12944 C3 environments. Drying hard in 1½ hours at 25ºC, International Intercure 99 can increase productivity, reduce VOC levels and provide anti-corrosive protection with long lasting aesthetics.High solids polyaspartic Single coat...
£839.99 (incl. VAT)
£699.99 (ex. VAT)
International Interlac 789 is a single component, rapid drying modified alkyd primer/finish, designed for use as a single coat system to afford anti-corrosive protection for structural steelwork exposed to the environment where cosmetic appearance is important, e.g. in dry internal areas or low corrosivity external environments.4,800+...
£363.35 (incl. VAT)
£302.79 (ex. VAT)
International Interseal 670HS (Winter Grade) is supplied with a winter grade curing agent to enable more rapid cure at lower temperatures. The product is still a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel and a...
£178.49 (incl. VAT)
£148.74 (ex. VAT)
International Interzone 954 is a two component, low VOC, high solids, modified epoxy barrier coat designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.A high film build, high...
£165.32 (incl. VAT)
£137.77 (ex. VAT)
International Interzone 1000 is one of the most proven and reliable glass flake epoxies on the market today, with documented in-service performance dating back almost 30 years. International Interzone 1000 provides outstanding abrasion and corrosion resistance to steelwork located in the harshest offshore and inland environments. Coverage...
£777.77 (incl. VAT)
£648.14 (ex. VAT)
This product is temporarily unavailable; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. International Intergard 345 is a two component, low VOC, high solids, fast curing epoxy primer/finish containing zinc phosphate...
£497.88 (incl. VAT)
£414.90 (ex. VAT)
International Interzone 954 (Rapid Cure) is a faster drying version of Interzone 954 to be used in tidal areas where immersion will be rapid. Designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and...
£165.32 (incl. VAT)
£137.77 (ex. VAT)
International Interbond 1202UPC (Universal Pipe Coating) is the universal pipe coating that reduces specification complexity and project costs. Suitable for protecting above-ground piping and accessories in new construction process plant operating at temperatures between -196ºC (-321ºF) to +650ºC (1202ºF). Single specification for the...
£2,268.50 (incl. VAT)
£1,890.42 (ex. VAT)
International Intercryl 525 is designed for use as a primer/finish for structural steel, in a wide variety of general industrial environments of light to moderate corrosivity, including on bridges, commercial buildings, infrastructure and manufacturing plants.Excellent colour and gloss retention 4,800+ colours, inc. RAL, RAL Design &...
£431.26 (incl. VAT)
£359.38 (ex. VAT)
International Intergard 410 is a high build, high performance, two component epoxy with excellent chemical and abrasion resistance.Suitable for use as part of a high performance coating system to provide an anti-corrosive barrier in areas where aggressive corrosion conditions prevail. 4,800+ colours, inc. RAL, RAL Design & Effect, BS,...
£113.86 (incl. VAT)
£94.88 (ex. VAT)
International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings.4,800+ colours, inc. RAL, RAL Design...
£178.49 (incl. VAT)
£148.74 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
There are specialist coatings listed which are designed to deliver a specific colour finish, such as a hammered gold finish, along with others such as Rust-Oleum CombiColor, which are available in almost the full range of RAL and British Standard (BS) colours. If you are unable to find a specific colour, please contact us and we may be able to assist you in colour matching a new coating to existing surface and substrate coatings.
