Rust-Oleum 9100 Winter Grade Epoxy
Rust-Oleum 9100 Winter Grade Epoxy is for application at temperatures down to 0°C. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application. Also ideal as a glossy floor paint for garages, warehouses, indoor car parks etc. Optimal protection can be achieved in only one or two layers.
With Rust-Oleum 9100 Epoxy System you can save time on;
- Application - Apply in one thick layer if required
- Mixing - Easy mixing and no thinning required.
- Surface Preparation - Can be applied directly to sound rusted surfaces without the need for blasting.
- Maintenance - Longer lasting results means reduced downtime for repairs and re-coating.
Features & Benefits
- Single coat application directly over rusted surfaces
- Excellent results with minimal surface preparation
- Full colour intensity in one coat
- Easy mixing
- Very resistant to abrasion
- Excellent resistance against immersion; can be used in swimming pools
- Resistant to oils, solvents and many chemicals
- Suitable for frequent cleaning with chemicals
- Tintable to virtually any colour
- High solids & Standard versions available
Choice of 3 versions:
- 9101 - Standard activator ideal for most circumstances
- 9101HS – Better coverage and low VOC
- 9101WG - For application temperatures down to 0°C
Rust-Oleum 9100 Winter Grade Epoxy is designed for application on manually prepared rusted steel surfaces and can also be used on clean, blasted steel, primed steel, concrete and previously coated surfaces. Rust-Oleum 9100 Topcoats are primarily intended for brush and airless spray application and can also be applied by roller.
Rust-Oleum 9100 Winter Grade Epoxy offers excellent protection against strong chemicals, acids, alkalis and solvents; frequent product spillage and chemical cleaning; high humidity and moisture conditions. If good U.V. resistance is required Rust-Oleum Polyurethane Topcoats 9200, 9600 or 9900 should be applied (except for the clear coatings).
Rust-Oleum 9100 Winter Grade Epoxy can be applied on cleaned, sound mineral substrates, sound, well prepared previous coatings; porous substrates should be primed with Rust-Oleum Impregnation Primer 5401; very dense substrates, like ceramic tiles, should be primed with Rust-Oleum Super Adhesive 3333.
Required primers:
Please note: The outdoor durability and chemical resistance of the system can be further improved by the application of an additional topcoat Rust-Oleum 9200 Rust-O-Thane or Rust-Oleum 9600 Rust-O-Thane Polyurethane
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.