Rust-Oleum 7200 Floorcoat PU is a single pack, polyurethane enhanced floor coating for use inside and out that offers good protection and is very easy to apply. Available in 4,100+ colours, in Gloss and Satin finishes, including RAL, BS or NCS shades (except metallic and fluorescent shades), and can be applied directly on concrete floors, wooden floors and masonry.
Extra durable because of polyurethane addition
Excellent flow and aspect
High coverage: 9m² per litre
Colours mixed on satin WH 2.5L bases are temporarily unavailable
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cart
Rust-Oleum 7200 Floorcoat PU is a single pack easy to apply solvent based urethane modified alkyd floor coating specially designed for applying on dry concrete, wood and masonry for interior and exterior use. Rust-Oleum 7200 Floorcoat PU is also ideal as a line marking product, the coating has a good resistance against abrasion and neutral detergents (no alkaline cleaning agents) and is resistant during short contact periods against lubricating oils, fuel, petrol etc.
Rust-Oleum 7200 Floorcoat PU can be applied directly on concrete floors, wooden floors and masonry which are completely clean and dry. It is not recommended to apply on smooth/dense concrete or concrete containing a damp repellent additive, which will prevent a good adhesion. Rust-Oleum 7200 Floorcoat PU can also be applied on old good adhering coatings and can also be applied onto metal floors which have been correctly prepared and primed with a suitable Rust-Oleum metal primer.
Product Advantages:
Extra durable because of polyurethane addition
Excellent flow and aspect
Any colour available in gloss & satin
For indoor and outdoor usage
For many different surfaces
High coverage: 9m² per litre
Can Be Used For:
Concrete floors
Line marking
Wooden floors
Pre-painted floors
Preparation:
To ensure homogeneity, coating materials should be thoroughly stirred prior to use. Remove oil, grease and other contamination with Rust-Oleum Mathys ND14 Cleaner Degreaser or high pressure (steam) cleaning in combination with appropriate detergents. Sand old intact coatings to roughen the surface in order to establish a good adhesion. Check the compatibility with old intact coatings. During application the surface should be dry and clean. On porous concrete a first coat should be applied with Rust-Oleum 7200 Floorcoat PU diluted with ±5% Rust-Oleum Thinner 633. On new concrete (>28 days) use Rust-Oleum 7201 Universal Floor Primer as a first coat or use Rust-Oleum Mathys 108 Surfa Etch Solution to neutralise any remaining alkalinity from the cement. Remove curing compounds by means of dust free blasting.
Roller: Sparingly, if required, with 5% Rust-Oleum Thinner 633. In case of roller application it can be necessary to apply 2 coats in order to obtain the recommended film thickness.
Air-Atomised Spray: Thin with max. 10% Rust-Oleum Thinner 641. Gravity cup and pressure cup. Tip size: 1.0 -1.5 mm. Atomising pressure: 2 – 4 bar.
Apply in a dry and well-ventilated area. Do not apply Rust-Oleum 7200 Floorcoat PU on alkaline substrates, or in areas which will be constantly under water.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Product Details
7268.2.5
Data sheet
For Use On
Concrete, Wood, Masonry
Application Method
Brush, Roller, Spray
Sheen
Gloss
Colour
Fully Tintable
Single, Two or Three Pack
Single
Pack Size
5L
Application
Brush, Roller, Spray
Dry to Handle (at 20°C)
8 Hours
Dry to Recoat (at 20°C)
24 Hours
Fully Cured (at 20°C)
1 week
Coverage
9m² per litre
Recommended Thinner/Cleaner
Thinner 633
Density
1,1
Solids by Volume
45 %
VOC
450 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Is the paint suitable to cover imprinted concrete driveway.
Answer:
No, unfortunately we do not have a product to recommend for painting an imprinted concrete driveway.
GABRIEL on 2022-05-17 07:22:18
Question:
Hi, I need to paint my concrete patio slabs. Considering that it's an outdoor surface, Is this the right product to use on those? Thanks!
Answer:
Assuming there is a damp proof membrane present below the slabs, they are not subject to vehicle traffic, they are bare, clean, dry, sound and prepared as detailed in the technical data sheet, this could be used.
We would recommend you test for compatibility and adhesion prior to full application.
J.mcathey on 2021-06-18 10:14:12
Question:
How long is the guarantee under normal patio conditions.
Answer:
Thank you for the enquiry, there is no guarantee offered with this product, but it is suitable for domestic levels of foot traffic when applied to a compatible, prepared substrate.
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray.
Can also be used for the cleaning of some surfaces prior to application of the coating.
Suitable for cleaning of the application tools such as Brushes,...
Rust-Oleum Mathys 108 Surfa Etch Solution is an easy to use, non-flammable and virtually odour free etching solution for the preparation of smooth concrete surfaces, masonry, galvanized steel and aluminum before applying a paint coating system.
Improves the adhesion of coating systems
Neutralizes alkaline salts
Also ideal to remove "white...
Rust-Oleum Mathys Alkaline Cleaner/Degreaser ND14 should be used to remove grease, oil, proteins, dirt and many other surface contaminants from coated, mineral and steel substrates.
Non-flammable, virtually odour-free cleaning/degreasing solution.
Can be used as an additive for high pressure and steam cleaning
Applied by synthetic sponge,...
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray.
Can also be used for the cleaning of some surfaces prior to application of the coating
Suitable for the cleaning of the application tools such as Brushes,...
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish.
Each kit contains:
12" Roller,...
Rust-Oleum 7201 Universal Floor Primer is ready for use solvent based adhesion primer based on a special epoxyester binder. Improves the adhesion of floor paints on mineral substrates. 1 component, easy to apply it can be recoated with all Rust-Oleum or Mathys floor paints.
For dense and porous floors
Increases durability of the 7200 floor...
Rust-Oleum Non-Skid Additive NS 100 an anti-slip HDPE granulate that turns a standard floor coating into a durable anti-slip coating. It is intended to be added to 1K floor paint to produce a subtle non-skid surface, that is easier to clean than coarse anti-slip floors.
Smaller size granules for more subtle anti-slip finish
Designed for...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates and do not take into account any substrate deviations or wastage