Teamac Micaceous Iron Oxide

421/Q167
TEA568

Teamac Micaceous Iron Oxide, is a high build coating for the protection of structural steelwork against corrosion.  It can be used as either an intermediate, or finish coat.  For use on cranes, transmission towers, bridges, lamp posts, railings etc.  Its thick anti-corrosive film is extremely effective in prolonging the life of these types of structures.

  • Thick, anti-corrosive layer.
  • Resistance to temperature and weathering.
  • Exterior steelwork protection.

Colour
Size
Finish
£103.41(ex. VAT)
£124.09 (inc. VAT)
Quantity
Please choose your colour
In Stock and Available for Delivery (See Delivery Options Below)

Description

Teamac Micaceous Iron Oxide, is a high build coating for the protection of structural steelwork against corrosion. It can be used as either an intermediate, or finish coat.  For use on cranes, transmission towers, bridges, lamp posts, railings etc.  Its thick anti-corrosive film is extremely effective in prolonging the life of these types of structures.

It also provides protection to steelwork exposed to weathering.  Can withstand temperatures up to 99°C and could therefore can be used in a system for medium temperature duties.  Ideally it should be used in a full painting sequence with anti-corrosive primers.



Click To Jump To Section:




Features & Benefits


  • Thick, anti-corrosive layer.
  • Resistance to temperature and weathering.
  • Exterior steelwork protection.



Product Specification


Technical Data
Volume Solids 75%
VOC Content 400 max g/litre
SG 1.3 @ 20°C
Viscostity 3 to 4 @ 25°C
Flash Point Above 32°C (closed cup)



Film Thickness Range And Coverage


Product Data
  Dry Film Thickness Wet Film Thickness Theoretical Coverage
Maximum 20 to 40 μm 30 to 60 μm
  • 6 to 8 m2/litre @ 20 to 40 micron D.F.T.



The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.



Drying Times


Drying Times At 20°C/RH 50%
Touch Dry: 2 - 4 Hours
Dry To Handle: 16 - 24 Hours
Dry To Recoat: Min 16 hours - Max 10 days
Fully Cured: 7 to 10 Days



Low temperature and high humidity will adversely affect application, drying and performance of any coating.



Surface Preparation


  • Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates.
  • Bare steel should be free from dust, rust and scale.
  • Blast cleaning to SA 2½ is recommended.
  • If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree.
  • Any oil or grease should be removed with Coo-Var Universal Degreaser before de-rusting.
  • Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts, welds etc.
  • Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.



Preceeding Coat




Subsequent Coat




Mixing


  • Stir well before use - DO NOT THIN.



Application Conditions


  • As dictated by normal good painting practice.
  • Care must be taken during application that the temperature is above the dew point to avoid any contamination.
  • In confined spaces, provide adequate ventilation during application and drying.



Application Methods


Method Airless Spray Conventional Spray Brush Roller
  No No Yes Yes



  • Thinner (Max vol): N/A
  • Nozzle Size: N/A
  • Nozzle Pressure: N/A
  • Cleaning Solvent: Thinners 14



Health & Safety


See safety data sheet - SDS 10679 in the attachments section above.

Click to go back to the top of the page

Product Details
568-405301

Data sheet

Water / Solvent Based
Solvent
For Use On
Steel
Sheen
Matt Metallic
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Single, Two or Three Pack
Single
Pack Size
5L
Suitable Substrates
Steel
Dry to Handle (at 20°C)
16 - 24 Hours
Dry to Recoat (at 20°C)
Min 16 hours - Max 10 days
Fully Cured (at 20°C)
7 to 10 Days
Coverage
5m² per litre
Recommended Thinner/Cleaner
Teamac Thinner 14
Solids by Volume
75%
Heat Resistance (up-to)
99°C
VOC
400 max g/litre
Touch Dry
2 - 4 Hours
Finish
Matt metallic
Size
5 litre
Recommended Dry Film Thickness
20 to 40 μm
Recommended Wet Film Thickness
30 to 60 μm
UN Number
UN1263
Suitable For Use On
Lamp posts
Suitable For Use On
Steel
Suitable For Use On
Bridges
Suitable For Use On
Transmission Towers
Suitable For Use On
Railings
Suitable For Use On
Cranes
Finish
Matt Metallic
Application Method
Brush
Application Method
Roller
Product Type
Midcoat
Product Range
MIO
Fastest Delivery
Next Working Day
Colour Family
Grey
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

Teamac Micaceous Iron Oxide is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like

Teamac Thinner 14

A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application. Suitable for use with Brush, Roller or Spray. Teamac Thinner 14 can also be used for the cleaning of some surfaces prior to application of the coating. Also suitable for the cleaning of...

Price £10.61 (ex. VAT)
In Stock and Available for Delivery

Teamac Metalcote Plant Enamel

Teamac Metalcote Plant Enamel, is a tough, flexible enamel paint with an attractive gloss finish and excellent durability. It has good resistance to lubricating, mineral oils, many common industrial chemicals and heat. Good resistance to oils, chemicals and heat Ideal for use on all types of machinery including tractors Available in...

Price £18.44 (ex. VAT)
In Stock and Available for Delivery

Teamac Zinc Rich Primer

Teamac Zinc Rich Primer, contains a very high concentration of metallic zinc and allows conductivity in the dried film. The zinc coating gives cathodic protection and is a form of cold galvanising.  Cold galvanises metal Protects against corrosion Use on iron and steel 500ml size temporarily unavailable Click to jump down to Technical...

Price £59.35 (ex. VAT)
In Stock and Available for Delivery

Coo-Var Universal Degreaser Cleaner

Coo-Var Universal Degreaser Cleaner is a careful blend of solvents to give powerful cleaning and degreasing properties. Product Features Degreases and removes oil patches from floors, walls, interior and exterior surfaces prior to acid etching or painting. Part of the cleaning process. Essential for a good finish. Can also be used as a...

Price £20.47 (ex. VAT)
In Stock and Available for Delivery

Teamac Metalcote Undercoat

Teamac Metalcote Undercoat. A full bodied, high opacity undercoat suitable for use with Teamac Metalcote Plant Enamel paint, used as a primer or undercoat on bare or previously painted surfaces, gives a matt finish, presents a good surface and enhances topcoat. High opacity pigments. Primer or undercoat. Good coverage and fast drying....

Price £23.68 (ex. VAT)
In Stock and Available for Delivery

General Painting Application Kit

General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

Price £8.02 (ex. VAT)
In Stock and Available for Delivery

Teamac Zinc Phosphate Primer

Teamac Zinc Phosphate Primer, an anticorrosive primer on iron and steel, for use with a range of conventional topcoats such as Teamac Marine Gloss and Teamac Metalcote Plant Enamel. Can be used for: Marine purposes Fire escapes Metal gates Metal garage doors Ideal in coastal areas Click to jump down to Technical Data Coverage...

Price £14.83 (ex. VAT)
In Stock and Available for Delivery

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £17.22 (ex. VAT)
In Stock and Available for Delivery