The website will be offline from 7:30pm for maintenance
Sub-category links
Filter By
Brand
Brand
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Min. Application Temperature
Min. Application Temperature
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
There are 32 products.
Active filters
Carboline Carboguard 635 is an all-purpose immersion-grade epoxy that can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers.Low temperature cure (20°F) Excellent corrosion protection Excellent application characteristics Fast recoat times Approved by ANSI/NSF Standard 61 for...
£302.40 (incl. VAT)
£252.00 (ex. VAT)
Carboline Carboguard 893 is a two-component, high solids corrosion resistant primer or intermediate coat over steel and inorganic zinc primers.Excellent corrosion protection Excellent film build and edge protection Can be top coated with a broad variety of high performance finish coats Used as a primer or an intermediate coating Good...
£108.00 (incl. VAT)
£90.00 (ex. VAT)
International Intercure 384 is a two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977As a high build intermediate to provide...
£131.68 (incl. VAT)
£109.73 (ex. VAT)
International Interplus 770 is a low VOC, two component, high solids, internally flexibilised, surface tolerant epoxy primer/intermediate coating intended for use as a versatile, high performance maintenance coating to upgrade tightly adhering existing coatings to longer life durable systems.4,800+ colours, inc. RAL, RAL Design &...
£184.54 (incl. VAT)
£153.78 (ex. VAT)
Jotun Penguard Express is a two component amine cured epoxy coating that is fast drying, high solids and high build. It is specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments.
£54.08 (incl. VAT)
£45.07 (ex. VAT)
Jotun Penguard Express CF is a two component polyamide cured, colour stable epoxy primer/finish coating that is fast drying, high solids and high build. It can be used as primer, mid coat or finish coat in atmospheric environments and is specially designed for new construction where fast dry to handle and over coating times are required....
£272.90 (incl. VAT)
£227.42 (ex. VAT)
Jotun Penguard Express MIO is a two component amine cured epoxy coating that is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in...
£74.02 (incl. VAT)
£61.68 (ex. VAT)
A two component amine cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments.
£72.12 (incl. VAT)
£60.10 (ex. VAT)
Jotun Penguard HSP is a two component polyamide cured epoxy coating that is fast drying, high solids and high build. This Jotun product can be used as a primer or mid coat in atmospheric environments, specially designed for new construction where fast dry to handle and over coating times are required.
£209.47 (incl. VAT)
£174.56 (ex. VAT)
Jotun Penguard HSP MIO is a two component polyamide cured epoxy coating that is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product. Can be used as a primer or a mid coat in atmospheric environments. Specially designed for new construction where fast dry to handle and over coating times are required. *Red,...
£210.84 (incl. VAT)
£175.70 (ex. VAT)
Jotun Penguard Midcoat is suitable for structural steel and piping to be exposed to corrosive environments up to very high. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment. A high solids, high build product designed as a mid coat in systems for new construction in atmospheric...
£269.04 (incl. VAT)
£224.20 (ex. VAT)
Jotun Penguard WF is a two component, anti-corrosive water borne epoxy coating that is a versatile, fast drying product containing flash rust inhibitors. It is specially designed for new construction where fast dry to handle and over coating times are required. Jotun Penguard WF can be used as primer, mid coat, finish coat or as single coat...
£343.86 (incl. VAT)
£286.55 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Min. Application Temperature
Min. Application Temperature
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
