Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Colour Family
Colour Family
Size
Size
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Rawlins Paints stock a range of marine paint topcoats for application to the majority of primed areas on a boat above and below the water line. These products last longer than most topcoats due to them being specifically developed for tough environments where contact with water, salt spray and year-round weather is expected. Although their primary function is to protect and decorate boats, they are extremely effective when used in other areas on suitably primed timber, metal and GRP.
There are 25 products.
Active filters
Teamac Marine Gloss is a high quality, modified long oil alkyd marine coating. It has excellent gloss and opacity.High gloss Excellent opacity and adhesion Touch dry in as little as 4 hours (at 20°C) Full hardness in 5 - 7 days Suitable for all general marine areas, bridge fonts, deck work, masts, superstructures etc Available in...
£19.86 (incl. VAT)
£16.55 (ex. VAT)
Teamac Teamalak Yacht & Seaplane Varnish (previously known as Teamalak Yacht Varnish), is a high gloss, high quality traditional marine gloss, UV resistant varnish.Interior and exterior use Can be used over existing paintwork to increase gloss finish.
£16.32 (incl. VAT)
£13.60 (ex. VAT)
Sherwin-Williams Macropoxy L524 (formerly known as Epigrip L524) is a high build 2-pack modified epoxy coating for immersive protection in salt water, fresh water and crude oil. Recommended UsesProtection of ships bottoms and cargo tanks Submerged/splash zone areas of marine structures Jetties External protection of buried and other...
£83.04 (incl. VAT)
£69.20 (ex. VAT)
Carboline Carboguard 690 GF is a glass-flake filled, cold cure epoxy having excellent film strength and resistance to water, salt water and wastewater exposures. Can be used on a variety of surfaces including structural steel, piping, pilings, ships, offshore structures, and other equipment exposed to industrial or marine environments.High...
Carboline Carboguard 890 GF is a glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets, including marine applications.Surface tolerant characteristics for less severe applications Low-temperature version: 890 LT GF Self-priming and primer/finish capabilities Excellent abrasion to...
£132.30 (incl. VAT)
£110.25 (ex. VAT)
PPG SigmaCover 456, a two-component, high-build, polyamide-cured recoatable epoxy coating available in 2,600+ colours, for steel and concrete structures exposed to atmospheric land or marine conditions, curing at temperatures down to -10°C (14°F). SigmaCover 456 can be recoated with various two-component and conventional coatings, even after...
£64.28 (incl. VAT)
£53.57 (ex. VAT)
PPG SigmaCover 456 HS is two component high solids polyamide cured recoatable zinc phosphate epoxy primer/coating. This general-purpose epoxy primer/coating is available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours, for steel and concrete structures in atmospheric exposure that can be recoated with various two-component...
£112.34 (incl. VAT)
£93.62 (ex. VAT)
PPG SigmaCover 522 is a two-component, micaceous iron oxide-pigmented, polyamide-cured epoxy primer/sealer/coating. It has excellent adhesion to, and sealing of, weathered, cleaned, zinc-rich primers and metal-sprayed steel, with good adhesion to properly pre-treated galvanized steel.Can be used in systems for atmospheric or water-immersed...
£333.41 (incl. VAT)
£277.84 (ex. VAT)
PPG SigmaDur 1800 is a two-component, high solids polymeric urethane with excellent resistance to atmospheric exposure conditions that cures down to –5°C (23°F), that can be recoated even after long atmospheric exposure.Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Outstanding colour and gloss retention...
£144.96 (incl. VAT)
£120.80 (ex. VAT)
PPG SigmaDur 520, a two-component, high-build semi-gloss aliphatic acrylic polyurethane finish that can be recoated an unlimited amount, with excellent resistance to atmospheric exposure conditions.Available in 2,300+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Easy application by roller and airless spray - Can be recoated...
£90.60 (incl. VAT)
£75.50 (ex. VAT)
PPG SigmaDur 550, a two-component, aliphatic acrylic polyurethane finish with excellent resistance to atmospheric exposure conditions that cures at temperatures down to -5°C (23°F).Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Can be recoated unlimited times Used on the exterior of the Padma Multipurpose...
£72.48 (incl. VAT)
£60.40 (ex. VAT)
PPG Sigmadur 550 H (formerly known as Sigmadur 568) is a two-component, high solids, high-build aliphatic acrylic polyurethane finish with excellent resistance to atmospheric exposure conditions with good colour and gloss retention, resisting splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals....
£118.87 (incl. VAT)
£99.06 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Colour Family
Colour Family
Size
Size
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Marine paint topcoats are available as part of a full system installation on coastal and offshore structures and vessels, including:
As well as for canal, river, sea and ocean vehicles and vessels:
Along with marine topcoats for submerged materials and substrates, Rawlins Paints also distribute an extensive range of industrial metal paint systems for power plants and chemical processing facilities which may require specialist tank and pipe lining coatings for water-cooling infrastructures.
Coastal areas, including shipping docks and ports, often require coating systems that can withstand excessive environmental changes for transportation of goods around the world, on vessels included, but not limited to:
Cargo holds are often subjected to the harshest operating environments, and without specific and successfully installed marine paint systems – primers, undercoats and topcoats – can be subject to impact and abrasion damage, or mechanical damage or failure, from the loading and carriage of dry cargoes across Europe or further afield. As faster loading techniques and equipment is utilised in major ports around the UK and Ireland, installing the correct coating system is imperative to minimising damage, attaining colour retention on all branded surfaces, and protecting surfaces and materials against UV damage and discolouration, salt-water and sea-spray, and more.
Please contact Rawlins Paints’ Technical Support Team for more information about product ranges, including:
To protect vessels, vehicles, offshore structures and cargo holdings, buy marine coat systems from Rawlins Paints. For additional maintenance and post-repair work redecoration and refurbishment work on metals, GRP, wood and other applicable substrates and materials, use a marine paint topcoat that is compatible and continues the surface protection being delivered by any undercoat system.
