The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
International Intergard 1735 is a high performance, low VOC, water borne two component epoxy with a high gloss finish. International Intergard 1735 is a tough, hard wearing chemically resistant epoxy finish suitable for most circumstances where the odour or emissions from solvent based coatings are unacceptable.
International Intergard 214 is a two component epoxy sealer coat pigmented with aluminium flake for the effective penetration and sealing of thermally sprayed aluminium coatings to eliminate porosity. Has specification approval for UK Department of Transport Item No.159.
International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
International Intergard 2510 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate, for use on properly prepared surfaces both in new construction and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
International Intergard 269 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance.
International Intergard 276 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance.
International Intergard 307 is a two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification. International Intergard 307 is intended to be used as a primer or blast primer under high build epoxy coating schemes for new construction.
International Intergard 345 is a two component, low VOC, high solids, fast curing epoxy primer/finish containing zinc phosphate anti-corrosive pigmentation. Suitable for use as a one or two coat primer/finish coating or as an intermediate over recommended anti-corrosive primers.
International Intergard 400 is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing.
International Intergard 405 is a two component epoxy sealer coat, pigmented with micaceous iron oxide. Formulated on proprietary polymer technology, which provides rapid cure and overcoating, even at low temperatures.
International Intergard 410 is a high build, high performance, two component epoxy with excellent chemical and abrasion resistance suitable for use as part of a high performance coating system to provide an anti-corrosive barrier in areas where aggressive corrosion conditions prevail.
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties.