There are 43 products.

Showing 13-24 of 43 item(s)

Active filters

Bradite One Can Matt

Bradite One Can Matt is a quick-drying matt finish primer/finish coat in one can, for use as a low odour, quick drying scuff and moisture resistant, adhesion promoting, stain locking, anticorrosive coating for interior or exterior walls and trim, masonry (Brickwork/Concrete etc) ferrous metals, non-ferrous metals, common plastics (e.g....

Price £21.37 (ex. VAT)
In Stock and Available for Delivery

Zinsser AllCoat Exterior Gloss (Solvent Based)

Zinsser AllCoat Exterior Gloss (Solvent Based) is designed for all exterior surfaces and is a mould resistant paint, ideal for new or previously painted wood, metal, cladding, UPVC window and door frames, stucco, brick, stone, cured concrete and more.  Multi surface application - Can be applied to 5°C Available in 4,400+ colours, inc. RAL,...

Price £34.22 (ex. VAT)
In Stock and Available for Delivery

Axalta ViterClad 50 Finish

Axalta ViterClad 50 Finish is a two pack recoatable polyurethane finish specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. Available in 350+ colours Expected system lifetime up to 15 years (depending on exposed...

Price £113.86 (ex. VAT)
In Stock and Available for Delivery

Axalta ViterClad Bonding Coat

Axalta ViterClad Bonding Coat, a modified two pack epoxy adhesion and stabilising primer, specially formulated for the maintenance and repair of architectural cladding. Recommended for the maintenance of Corus Colorcoat HP200 cladding Wide colour range of over 350+ RAL and BS shades to suit all finishing shades Specially formulated for...

Price £90.41 (ex. VAT)
In Stock and Available for Delivery

Axalta ViterClene C Degreasing Solution

Axalta ViterClene ‘C’ Degreasing Solution, a single pack bio-degradable detergent wash, for the efficient removal of dirt, oil or grease prior to painting. Specially formulated for use with ViterClad cladding coatings. Specifically recommended for cleaning Plastisol or other sheeting prior to coating with ViterClad systems Effective for...

Price £73.62 (ex. VAT)
In Stock and Available for Delivery

Axalta ViterClad M50 Finish

Axalta ViterClad M50 Finish, a high performance two pack polyurethane metallic finish specially designed and tested for the maintenance repainting of architectural cladding. Expected system lifetime up to 15 years (depending on exposed environment and shade) Suitable for urban, marine and industrial environments Tough, durable finish...

Price £230.88 (ex. VAT)
In Stock and Available for Delivery

HMG PVC17 Colours

HMG PVC17 Colours is a single pack vinyl acrylic with exceptional flexibility and adhesion for direct application to many difficult to coat substrates including hard plastics, powder coatings, most factory finishes and architectural cladding. Also suitable for flexible substrates, PVC curtain material, uPVC, plastisol, cladding coatings and...

Price £31.33 (ex. VAT)
In Stock and Available for Delivery

Axalta Plicote HB Finish

Axalta Plicote HB Finish is a highly durable acrylated rubber coating that is suitable for direct application onto suitably prepared exterior masonry and Plastisol cladding, where the product offers anti-carbonation properties and a reduction in the ingress of water and chlorine ions. Can be used for overcoating surfaces previously painted...

In stock

KoverTek TekTor Acrylic Barn Paint

TekTor Acrylic Barn Paint, a specially formulated water-based coating, combining high build modified acrylic polymer resins to provide a tough, flexible and durable exterior or interior finish suitable for use on a wide range of substrates. For barns, stables, outbuildings, sheds and fences. Ideal as a decorative, protective coating for...

Price £44.00 (ex. VAT)
In Stock and Available for Delivery

Tikkurila Temadur 10

Tikkurila Temadur 10, a two-component matt polyurethane paint containing anti-corrosive pigments used as a single-coat paint for steel, zinc and aluminium surfaces. Huge colour range available with RAL, BS & NCS shades Can also used as a primer or a matt topcoat in epoxy systems exposed to weathering and/or chemical stress...

Price £129.57 (ex. VAT)
In Stock and Available for Delivery

Tikkurila Temadur 20

Tikkurila Temadur 20, a 2-pack semi-matt polyurethane paint that can be used as a single-coat paint for steel, zinc and aluminium surfaces with its anti-corrosion pigmentation, and also used as a primer or as a semi-matt topcoat in epoxy-polyurethane systems. It is also suitable for use on uPVC. Huge colour range available with RAL, BS...

Price £47.97 (ex. VAT)
In Stock and Available for Delivery

Tikkurila Temadur 50

Tikkurila Temadur 50, a time-proven, easy-to-use general purpose topcoat for constructional steelwork and machinery, with a wide range of colours to choose from. Two-component, durable and non-chalking semi-gloss polyurethane paint, hardener aliphatic isocyanate Forms a durable, easy-to-clean and non-chalking topcoat with good gloss and...

Price £18.33 (ex. VAT)
In Stock and Available for Delivery

Rust Protection from Metal Cladding Paints

The lifespan of metal cladding coatings can be visually observed. Metal cladding sheets rust and deteriorate from seasonal elements, cut edge corrosion, chemical cleaning agents and possible airborne chemicals around industrial plants and factories – an example of airborne chemicals would include exhaust fumes from adjacent car-parking or delivery vehicles at loading bays, where metal cladding may be used.

Metal, plastic and Plastisol cladding can be found at a wider range of facilities and locations away from factory sites. Many holiday and residential parks utilise cladding on their buildings and maintenance portable cabins (portakabins), as well as hospitals, retail outlets, sports centres (rowing clubs, gymnasiums, training centres), and schools.

If your business has cladding, you may be looking for sustainable and long-term coating system solutions, rather than quick fix decorative remedies. Metal and Plastisol cladding is eye-catching and a huge part of a company’s aesthetical qualities for prospective customers and sales, so be sure to use the best products available to avoid corrosion and rust deteriorating the cladding’s integrity.

Plastisol Cladding Paint – PVC Coated Sheets

Plastisol sheets which are used for cladding building roofs are very high quality galvanised steel sheets, with a primer painted surface and PVC rolled onto it. This ensures for longevity and durability against discolouration, fading, scratching and other minor defects.

Rawlins Paints supply a wide range of Plastisol paints and coatings, from industrial and commercial paint manufacturers, including Rust-Oleum Mathys, Thermoguard, Tor Coatings and Wethertex.

Tor Coatings have a name synonymous with quality and their Raincoat cladding coating range comprise of single pack systems that can also be used in conjunction with their Raincoat roof coatings. Tor Raincoat Cladding Finish can be used on Plastisol cladding, but is also a high build protective finish for the renovation of factory coated profile metal vertical cladding panels, roofing trims etc. in moderate environmental locations. Available in an impressive range of colour options, along with many other cladding coatings, it is recommended to check the weather forecast prior to use, and avoid application if rain is imminent.

Torclad Colour Dynamic (RC402) is a two-pack, high solids aliphatic urethane pre-polymer containing light-fast pigments and inert extenders, that can be used on cladding, roofing and steel structures. Like Tor Raincoat Cladding Finish, it is available as a semi-gloss finish in an extremely wide range of colours – ideal for matching company and brand colours.

If you are unsure whether a listed metal cladding paint can also be used to paint Plastisol cladding, give us a call, or download the latest data sheet, which will have further technical information about the product.

Primer Cladding Paint

We stock everything you need to make sure your metal or plastic cladding is suitably maintained. Rust-Oleum PVDF Primer is a super adhesion primer for galvanised steel, zinc and aluminium cladding and PVDF or PVF2 cladding.

Rust-Oleum Mathys Metal Cladding Primer is a water dilutable coating specially designed for application on weathered cladding to provide a perfect base for recommended and compatible topcoats. Available in white, light or dark grey, this primer helps protect cladding from further oxidisation, cut edge corrosion or rust.

A self-priming coating, Thermoguard Cladcoat works for most metal and plastic cladding. Approved for Plastisol, Thermoguard can also be used on rigid plastics, including Foamex but it’s recommended that spot tests are carried out on other types of plastic to make sure the finish will be as required. It can be used on railings, gates, metal fencing, most building plastics and galvanised metal, making it a good all-in-one coating.

Metal Cladding Coating - Topcoats

Rust-Oleum Mathys Metal Cladding Topcoat is a long lasting acrylic paint with a semi-gloss finish. It’s designed to be long lasting with a life expectancy of up to ten years. Mathys Metal Cladding Topcoat is specially designed to use as a metal cladding finish on top of Rust-Oleum PVDF Primer, Rust-Oleum Mathys Metal Cladding Primer or on any metal surface that has been coated with Rust-Oleum Noxyde Peganox or Rust-Oleum Noxyde. In some cases, Mathys Topcoat can be directly applied to Plastisol wall cladding surfaces. Whichever surface it’s used on, the result is a decorative satin topcoat that is much cheaper than replacing cladding entirely to give the building a facelift.

Metal Paint for PVC Coated Cladding

Rust-Oleum Mathys Noxyde metal paints range, including Pegarust and Peganox, can be used on industrial cladding roofs, protecting the surface with its anti-corrosive and anti-rust membrane, which is impermeable to water and winter elements.

  • Excellent corrosion protection and waterproofing
  • Applicable in cold temperatures down to 0°C or on damp surfaces
  • 200% elasticity - does not crack or peel when metal shrinks or expands
  • Prevents rust from spreading
  • UV resistant and protects against abrasion
  • Impact resistant
  • Primer and topcoat in one
  • Approved for corrosion class up to C5-M high (ISO 12944)

Cladding Definitions

Plastisol HP200 - easily recognised by its classic ‘leathery’ surface texture, this type of cladding has been available since 1987 (previous Mk.1 and Mk.2 versions were available from 1965 and had a similar appearance).

Colorcoat HPS200 - this has a ‘dimpled’ surface texture, quite different from traditional leather-grain Plastisol. This Scintilla pattern has a tiny ‘S’ impressed inside it, and has been available since 1998.

PVF2, Silicone Polyester and Powder Coating - these common types of cladding have no surface texture and are therefore easily distinguished from either type of Plastisol shown above.

Guarantees, Warranties and Life Expectancies for Large Cladding Projects

Painting cladding is much more cost effective and less disruptive to the building than replacement. Using our products, it is possible for any competent person to protect and rejuvenate their weathered cladding, improving its life expectancy.

However, often larger cladding projects require some form of ‘guarantee’ for the client and/or building owner to provide peace of mind that the coating system applied to the cladding will last for an agreed period of time.

We offer systems that can be used year round to provide up to 20 years protection when applied by an approved contractor to Plastisol HP200, HPS200, PVF2, Powder Coating, Galvanised Steel and more. More than 15 million squares metres have been protected with our systems that are available in virtually any colour including metallic shades protecting against atmospheric, chemical and mechanical deterioration.

We will visit your site and carry out a full inspection, write a tailored specification to meet your requirements and offer an approved contractor for the application. We will never offer a contractor that we have not trained and approved, all our contractors have successfully completed specific product training on the systems they apply and are monitored regularly to ensure the highest standard of quality is achieved.

By using one of our nationwide approved contractors for our products you enable yourself to take advantage of our guarantees, life expectancies and warranties. This means if we say our system is going to last a certain amount of time, or perform in a certain way and it doesn’t, you’re covered.

If you’re a contractor and would like to become an approved installer of our systems please contact us on 0113 245 5450