Jotun Hardtop Flexi Alu has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. Low VOCs, application of single coats up to 110 microns and fast drying add to the features of Hardtop Flexi Alu. This is one of the few products that contain anti-corrosive pigments for the best direct to metal...
Jotun Jotamastic 80 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids product.Specially designed for areas where optimum surface preparation is not possible or desired Can be used as a primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments Also...
Jotun Jotamastic 80 WG (Wintergrade) is a two component polyamine cured epoxy mastic coating.Surface tolerant High solids product Specially designed for application at lower temperatures to facilitate faster curing times on areas where optimum surface preparation is not possible or desired Also available in Aluminium for improved...
Jotun Jotamastic 87 is a two component epoxy mastic coating for repair and maintenance. The product is surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity.
Jotun Jotamastic 87 Alu provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures.
Jotun Jotamastic 87 GF WG is a Wintergrade version of Jotamastic 87 GF to aid application at lower temperatures and provide faster curing times. Jotun Jotamastic 87 GF WG is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids, high build product. Reinforced with glass flakes for improved abrasion and...
Jotun Jotamastic 87 WG is a `Wintergrade` version of Jotamastic 87 to aid application in lower temperatures and provide faster cure and dry times.Two component epoxy mastic coating for repair and maintenance. Surface tolerant High solids High build product Specially designed for areas where optimum surface preparation is not possible...
Jotun Jotamastic 90 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. This Jotun product is tintable in a wide range of colours and is specially designed for areas where optimum surface preparation is not possible or desired.Provides long lasting protection...
Jotun Jotamastic 90 GF is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. It is reinforced with glass flakes for improved abrasion and scratch resistance. Specially designed for areas where optimum surface preparation is not possible or desired.Now available...
Jotun Jotamastic 90 WG is a winter grade version of Jotamastic 90 to aid application in lower temperatures and to provide faster drying and curing times.Two component polyamine cured epoxy mastic coating Also available as Jotun Jotamastic 90 Aluminium WG for improved barrier effect Surface tolerant Abrasion resistant High solids High...
Jotun Jotamastic SF is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion and specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity....
Jotun Jotamastic Smart Pack is a two component amine cured epoxy mastic coating that is a surface tolerant, high solids, high build product. Specially designed for application with brush and roller with a 1:1 mixing ratio for easy use and reduced wastage. Specially designed for areas where optimum surface preparation is not possible or...
There are specialist coatings listed which are designed to deliver a specific colour finish, such as a hammered gold finish, along with others such as Rust-Oleum CombiColor, which are available in almost the full range of RAL and British Standard (BS) colours. If you are unable to find a specific colour, please contact us and we may be able to assist you in colour matching a new coating to existing surface and substrate coatings.