Tikkurila Temacoat GS 50, a two-component, polyamide-cured high build epoxy finishing and intermediate coat for protection of steel framework, conveyors, tubular bridges and other steel structures from abrasion and mechanical and/or chemical stress.
Fast cure hardener available on request
Can also be used as a sealer or a single-coat paint and be applied directly on zinc and aluminium surfaces
Huge colour range from RAL, BS and NCS
Rapidly recoatable and ready to handle
Product customisation
Don't forget to save your customization to be able to add to cart
Tikkurila Temacoat GS 50 is a two-component, polyamide-cured high build epoxy finishing and intermediate coat that protects steel framework, conveyors, tubular bridges and other steel structures from abrasion and mechanical and/or chemical stress.
Recommended for haulage equipment, steel frameworks, conveyors, tubular bridges and other steel structures, it is used as a topcoat or an intermediate coat in epoxy and polyurethane systems and can also be used as a sealer or a single-coat paint and be applied directly on zinc and aluminium surfaces.
Rapidly recoatable and ready to handle, Temacoat GS 50 is available in a huge colour range.
Fast cure hardener (008 5605) available on request - contact our sales team on 0113 2455450 or [email protected] to discuss your requirements.
Used as a topcoat or an intermediate coat in epoxy and polyurethane systems
Can also be used as a sealer or a single-coat paint and be applied directly on zinc and aluminium surfaces
Protects steel framework, conveyors, tubular bridges and other steel structures.
Huge colour range
Used for surfaces exposed to abrasion and mechanical and/or chemical stress
Rapidly recoatable and ready to handle
Recommended for haulage equipment, steel frameworks, conveyors, tubular bridges and other steel structures
Technical Data
Volume Solids: 57±2% (ISO 3233)
Weight Solids: 71±2%
Specific Gravity: 1.3 - 1.4 kg / l (mixed)
VOC:
The Volatile Organic Compounds amount is 370 g/litre of paint mixture.
VOC content of the paint mixture (thinned 25 % by volume) is 498 g/l.
Mixing Ratio:
Base 4 parts by volume Temacoat GS 50
Hardener 1 part by volume 008 5600 or 008 5605 (fast)
Pot Life (at 23℃)
6 hours with Hardener 008 5600
3 hours with Hardener 008 5605
Recommended Film Thicknesses and Theoretical Coverage
Recommended film thicknesses
Theoretical coverage
Wet
Dry
105µm
60µm
9.5 m²/l
175µm
100µm
5.7 m²/l
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying Times
DFT 70 µm
0°C
5°C
10°C
23°C
35°C
Dust dry, after
with Hardener 008 5600
4h
3h
1h
½h
15min
with Hardener 008 5605
3h
2h
¾h
½h
12min
Touch dry, after
with Hardener 008 5600
22h
14h
10h
4½h
2½h
with Hardener 008 5605
12h
8h
6h
3½h
2h
Recoatable with epoxy paints, min. after
with Hardener 008 5600
30h
24h
6h
2h
1h
with Hardener 008 5605
18h
14h
4h
1½h
¾h
Recoatable with polyurethane paints, min. after
with Hardener 008 5600
2d
36h
20h
8h
4h
with Hardener 008 5605
1½d
24h
12h
6h
3h
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Surface Preparation
Primed surfaces:
Oil, grease, salt and dirt are removed from the surface by appropriate means.
Repair any damage to the primer coat.
Note the overcoating time of primer. (ISO 12944-4)
Zinc surfaces:
Sweep blast clean with mineral abrasives, e.g. quartz sand, to an even roughness.
(SaS, SFS 5873) If sweep blasting is not possible, the surface should be roughened by hand abrading or washed with Panssaripesu detergent.
For hot dip galvanized surfaces see separate application instructions or contact Tikkurila Technical Service/Rawlins Technical on 0113 2455450 (option 2) or send a message to [email protected]
Aluminium surfaces:
Sweep blast clean with non-metallic abrasives to an even roughness. (SaS, SFS 5873)
If sweep blasting is not possible, the surface should be roughened by hand abrading or washed with Maalipesu detergent.
All surfaces must be clean, dry and free from contamination.
During application and drying the temperature of the surface should not fall below 0°C.
The surface temperature of steel should remain at least 3°C above the dew point.
Relative humidity of the air should not exceed 80% during application and drying.
The product should not be applied at temperatures below 0°C when there is a possibility of ice formation on the substrate.
For proper application the temperature of the product itself should be above +15°C during mixing and application.
Good ventilation and sufficient air movement is required in confined areas during application and drying.
Note! There is a natural tendency of this coating to chalk, discolor or yellow unevenly. It is recommended to use polyurethane topcoat when there are high aesthetical requirements on colour appearance.
Mixing Components
First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use.
Use power mixer for mixing.
Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.
Application
For airless spraying, the product is thinned approximately 5–25%.
Recommended nozzle tip is 0.011"–0.017" and pressure 120–160 bar.
Spray angle shall be chosen according to the shape of the object.
For brush application product should be thinned according to the circumstances.
Used as a topcoat or an intermediate coat in epoxy and polyurethane systems; Can also be used as a sealer or a single-coat paint and be applied directly on zinc and aluminium surfaces
Application
Brush, Spray
Coverage
5.7 m²/l to 9.5 m²/l
Recommended Thinner/Cleaner
Thinner 1031
Unit Contents
Base, hardener
Compatible Primers
Temacoat GPL-S Primer, Temacoat GPL-S MIO, Temabond ST 200, Temabond ST 300
Compatible Topcoats
See description/data sheet
Solids by Volume
57±2% (ISO 3233)
VOC
370 g/litre. VOC content of the paint mixture (thinned 25 % by volume) is 498 g/l.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tikkurila Temacoat GS 50 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tikkurila Temabond ST 200 is a two component high-solids, aluminium pigmented modified epoxy maintenance paint for demanding surfaces such as steel structures, railway vehicles, and infastructure in energy and telecommunications.
Surface-tolerant high-solids epoxy paint.
Very good adhesion even to hand-prepared steel.
Lower VOC emissions...
Tikkurila Temabond ST 300 is a two-component high-solids, modified tintable epoxy maintenance paint for demanding surfaces, and is recommended for repairing of damages caused by transport or installation.
Surface-tolerant with a wide colour range
For steel and concrete surfaces
Very good adhesion, even to hand-prepared steel
Lower VOC...
Tikkurila Temacoat GPL-S MIO is a two-component, polyamide cured epoxy paint pigmented with micaceous iron oxide, with superior adhesion to steel surfaces forming a very strong and durable film that can be used as a primer or an intermediate coat in aggressive environments
Fast cure and low-temperature cure hardeners available - click to...
Tikkurila Temacoat GPL-S Primer is a two-component, polyamide-cured high build epoxy primer containing zinc phosphate.
Excellent adhesion to steel, zinc and aluminium surfaces.
Used as a primer or an intermediate coat in paint systems exposed to abrasion and chemical stress.
Can be overcoated after a prolonged period of time.
Faster...
Temacoat GPL, a two-component, amine adduct cured mar and chemical resistant epoxy topcoat used especially as a finishing coat especially for objects exposed to heavy abrasion and chemical attack. Due to CE marking it is also suitable for concrete surfaces in process industries.
Recommended for bridges, tanks and different types of...
Tikkurila Temacoat GS 50, a two-component, polyamide-cured high build epoxy finishing and intermediate coat for protection of steel framework, conveyors, tubular bridges and other steel structures from abrasion and mechanical and/or chemical stress.
Fast cure hardener available on request
Can also be used as a sealer or a single-coat paint...
Tikkurila Temadur 10, a two-component matt polyurethane paint containing anti-corrosive pigments used as a single-coat paint for steel, zinc and aluminium surfaces.
Huge colour range available with RAL, BS & NCS shades
Can also used as a primer or a matt topcoat in epoxy systems exposed to weathering and/or chemical stress...
Tikkurila Temadur 20, a 2-pack semi-matt polyurethane paint that can be used as a single-coat paint for steel, zinc and aluminium surfaces with its anti-corrosion pigmentation, and also used as a primer or as a semi-matt topcoat in epoxy-polyurethane systems. It is also suitable for use on uPVC.
Huge colour range available with RAL, BS...
Tikkurila Temadur 50, a time-proven, easy-to-use general purpose topcoat for constructional steelwork and machinery, with a wide range of colours to choose from.
Two-component, durable and non-chalking semi-gloss polyurethane paint, hardener aliphatic isocyanate
Forms a durable, easy-to-clean and non-chalking topcoat with good gloss and...
Tikkurila Temadur 90, 2-pack, high gloss polyurethane paint recommended to be used as a glossy decorative finishing coat for epoxy systems on a variety of substrates such as steel, aluminium, concrete etc. exposed to severe weathering and/or chemical stress.
Forms a durable, easy-to-clean and non-chalking topcoat with outstanding gloss and...
Tikkurila Temadur HS 90, a two-component, high-solids glossy polyurethane paint, hardener aliphatic isocyanate recommended to be used as a glossy topcoat for epoxy systems exposed to weathering and/or chemical stress.
Huge colour range from RAL, BS & NCS
Forms a smooth and silky surface with outstanding gloss
Retains its gloss far...
Tikkurila Temadur SC-F 20, recommended especially to be used as a single coat finish for agricultural and earth moving machinery and other machinery and equipment, with active anti-corrosive pigments that ensure corrosion resistance even in severe climatic conditions.
Can help speed up the painting process and decrease the overall costs of...
Tikkurila Temadur SC-F 50, a 2-component fast-drying semi-gloss polyurethane paint with excellent weathering and abrasion resistance, recommended especially to be used as a single coat finish for agricultural and earth moving machinery and other machinery and equipment.
Huge range of colours available from RAL, BS & NCS
Also suitable...
Tikkurila Temadur SC-F 80, a two-component fast-drying glossy polyurethane paint, containing anti-corrosive pigments, developed for single-coat painting agricultural and earth-moving machinery.
Huge range of colours available from RAL, BS & NCS
Meets the requirements set in Volvo STD 423-0014, accelerated corrosion test for 6 weeks...
Tikkurila Temathane PC 50, a high-solids two-component, semi-gloss polyurethane paint, hardener aliphatic isocyanate recommended for painting of storage tank exteriors, steel buildings and other steelwork.
Huge colour range available, with RAL, BS & NCS shades
Prequalified in the NORSOK system 1 and therefore an excellent choice for...
Tikkurila Temathane PC 80, a high-solids two-component, glossy polyurethane paint (with hardener aliphatic isocyanate) that is particularly suitable for harsh environments, helping extend the service life of the paint system.
Huge colour range with RAL, BS & NCS shades
Excellent choice when a high-solids topcoat with extremely good...
Tikkurila Temathane 50 is a two-component, semi-gloss polyurethane paint, hardener aliphatic isocyanate.
Dries rapidly and is easy to apply.
Recommended to be used as a semi-gloss topcoat for epoxy and polyurethane systems exposed to weathering.
A durable, easy to clean and non-chalking topcoat.
Excellent weathering and abrasion...
Tikkurila Temathane 90 is a two-component, glossy polyurethane paint, hardener aliphatic isocyanate.
The paint is used as a glossy topcoat for epoxy and polyurethane systems exposed to weathering.
Forms a durable, easy-to-clean and non-chalking finish.
Suitable for painting the outside of storage tanks, steel building and other steelwork....
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...