Sub-category links
Filter By
Brand
Brand
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
There are 16 products.
Carboline Carboguard E 19 Primer is a two-component epoxy polyamide primer containing zinc phosphate. A versatile epoxy primer with excellent resistance to salts, water and alkalies, with very good resistance to mild acids and solvents.Excellent corrosion resistance Cured film is tough and abrasion resistant Used 40% diluted as a...
£110.70 (incl. VAT)
£92.25 (ex. VAT)
A fast drying reputation isn`t all International Intercure 200HS is renowned for. Complete with MIO, this fast cure anti-corrosive primer/intermediate with added barrier protection, can improve your productivity and lower your solvent emissions.Primer and intermediate in just one coat Rapid recoat times Low temperature cure, cures down...
£578.96 (incl. VAT)
£482.47 (ex. VAT)
International Intercure 324 is a two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.Excellent barrier protection Low temperature cure and Rapid overcoating properties Pigmented with zinc phosphate anti-corrosive pigment to comply with the requirements of BS5493:1977
£111.84 (incl. VAT)
£93.20 (ex. VAT)
International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
£229.64 (incl. VAT)
£191.37 (ex. VAT)
International Intergard 2510 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate, for use on properly prepared surfaces both in new construction and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
£477.50 (incl. VAT)
£397.92 (ex. VAT)
International Intergard 400 is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing.
£364.60 (incl. VAT)
£303.83 (ex. VAT)
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties.High solids epoxy intermediate Micaceous Iron Oxide variant for additional barrier protection...
£378.20 (incl. VAT)
£315.17 (ex. VAT)
International Interplate 937 is a two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F), with minimum production of zinc salts. Suitable for high speed welding and cutting with excellent resistance to damage caused by welding, gas cutting and fairing.
£391.78 (incl. VAT)
£326.48 (ex. VAT)
With a proven 21 years` track record on over 8,700 projects, International Intershield 300 is the offshore industry benchmark in anti-corrosive performance. This unique abrasion resistant, pure epoxy coating, with an aluminium content >9%, offers long term asset protection to offshore structuresUnparalleled long term corrosion and...
£624.32 (incl. VAT)
£520.27 (ex. VAT)
International Interzinc 52 is a two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20. It has been designed to provide excellent corrosion resistance in both maintenance and new construction situations.
£610.56 (incl. VAT)
£508.80 (ex. VAT)
International Interzinc 72 is a two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance both as a single coat and as a primer for a high performance coating system. Contains 90% zinc by weight in the dry film.
£438.24 (incl. VAT)
£365.20 (ex. VAT)
Please contact our technical team on 0113 2455450 (option 2) to order this product. Carboline Polyclad 777 Slow-Set is a two-component, solvent-free aromatic polyurethane, ASTM D16 Type V. A high performance 100% solids structural polyurethane coating designed to provide superior corrosion protection for steel, ductile iron, and concrete...
£0.00 (incl. VAT)
£0.00 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
