- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Page 2 - Direct to Metal Paints
Subcategories
Tor Adheron Metal Primer Finish
Tor Adheron Metal Primer Finish, a general purpose quick-drying anti-corrosive primer/finish for steel that can be applied by brush, roller or spray. Designed to give a tough but flexible primer/finish, the primer can be overcoated with conventional alkyd and chlorinated rubber finishes after just 4 hours. Additional coats of Tor Adheron Metal...
Jotun Jotamastic 87 GF WG
Jotun Jotamastic 87 GF WG is a Wintergrade version of Jotamastic 87 GF to aid application at lower temperatures and provide faster curing times. Jotun Jotamastic 87 GF WG is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids, high build product. Reinforced with glass flakes for improved abrasion and...
Cromadex 890 Two Pack Non-Isocyanate Acrylic Primer Finish
Cromadex 890 Two Pack Non-Isocyanate Acrylic Primer Finish is a two pack gloss primer finish formulated without isocyanate helping to reduce health and safety concerns. The product contains zinc phosphate giving added corrosion resistance for greater durability, it is also high build making it suitable for application onto blasted steel....
Tikkurila Duasolid 50
Tikkurila Duasolid 50, a two-component, high-solids oxirane ester paint containing active anti-corrosive pigments. This eco-friendly alternative to epoxy and polyurethane paints is suitable for earth moving machines, haulage and lifting equipment, forklifts, agricultural machinery, electric appliances, pumps and other steel structures,...
International Interlac 789
International Interlac 789 is a single component, rapid drying modified alkyd primer/finish, designed for use as a single coat system to afford anti-corrosive protection for structural steelwork exposed to the environment where cosmetic appearance is important, e.g. in dry internal areas or low corrosivity external environments. 4,800+...
PPG SigmaCover 350 LT
SigmaCover 350 LT is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating that cures at temperatures down to -5°C (23°F), available in 2,600+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds. Available in 2,600+ colours, inc. RAL, BS, NCS & the new...
International Intercure 99
As a single coat polyaspartic primer finish, International Intercure 99 can replace two coat systems for ISO 12944 C3 environments. Drying hard in 1½ hours at 25ºC, International Intercure 99 can increase productivity, reduce VOC levels and provide anti-corrosive protection with long lasting aesthetics. High solids polyaspartic Single coat...
International Interzone 762
International Interzone 762, a two component high performance anti-corrosive coating for application at new construction where high build and fast cure combine to optimise the throughput of steelwork and minimise production overheads. Can also be applied as a maintenance coating on site High build characteristics Minimises downtime and...
Resimac Resichem 555 Resinox
Resichem 555 Resinox is a single pack water based high build acrylic coating. The product is supplied ready to use and is ideal for protecting metallic and cementitious surfaces subject to weathering and corrosion. The product is capable of long term corrosion protection on mechanically abraded or hydro-blasted surfaces. Supplied ready to use...
HMG CB1004 1K Etch Primer
Single-pack, quick-drying anti-corrosive etch primer available in black or grey. Suitable for ferrous and non-ferrous metals, including bare steel, aluminium, and galvanised surfaces. Chromate-free, phenolic-free, and compatible with powder coatings. Overcoatable with most primer systems and suitable for conventional spray or brush...
Bonda Easy Fill
Two-part polyester filler. For all interior and exterior wood, metal, concrete and GRP. Hardens in 10-15 mins at ambient temperature. Strong, long lasting repair.
PPG SigmaFast 205
2 component, 2,300+ semi-gloss colours. For the protection of steel and concrete. General-purpose epoxy primer/coating for atmospheric conditions. Fast-curing. Recoatable with most two-component epoxy and polyurethane coatings. Important! Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary...
Rust-Oleum CombiColor Original - Chartwell Green
The ultimate direct to metal paint in Chartwell Green*, providing years of protection in minutes: Apply to bare, manually derusted or ready primed mild steel Also available in over 4,100 colour options Primer and metal topcoat in one Interior/exterior use Sag resistant - leaves no brush/roller strokes Please note: Colours are sold...
Rust-Oleum CombiColor Original - Anthracite Grey
The ultimate direct to metal paint in Anthracite Grey (RAL 7016), providing years of protection in minutes: Apply to bare, manually derusted or ready primed mild steel Looking for a lighter or darker grey? Pick one of our 12 trending shades of grey here Also available in over 4,100 colour options Primer and metal topcoat in one...
Rust-Oleum CombiColor Original - Shades of Green
Pick from 1100+ greens including this year's 12 trending shades of green, including Chartwell Green, in the ultimate direct to metal paint, providing years of protection in minutes: Apply to bare, manually derusted or ready primed mild steel Also available in over 4,200 colour options Primer and metal topcoat in one Interior/exterior...
Rust-Oleum CombiColor Original - Shades of Blue
Pick from 650+ blues including this year's 12 trending shades of blue in the ultimate direct to metal paint, providing years of protection in minutes: Apply to bare, manually derusted or ready primed mild steel Also available in over 4,200 colour options Primer and metal topcoat in one Interior/exterior use Sag resistant - leaves no...
Rust-Oleum CombiColor Original - Shades of Grey
Pick from 290+ grey shades and this year's 12 trending shades of grey, including Anthracite Grey, in the ultimate direct to metal paint, providing years of protection in minutes: Apply to bare, manually derusted or ready primed mild steel Also available in over 4,200 colour options Primer and metal topcoat in one Interior/exterior use...
Jotun Jotacote Universal S120
Two-component epoxy coating with high adhesion and corrosion protection in buff, light red, grey, light green, light grey. Use on aluminium, carbon steel, galvanised and stainless steel, and shop-primed surfaces. Marine certified for ballast tanks; low VOC and PSPC approved. Suitable for offshore, refineries, bridges, and structural...
Hempel Hempathane Fast Dry 55750
Two-component polyurethane paint. Cured with aliphatic isocyanates. Good gloss retention and colour stability. Contains zinc phosphate. Recommended as a high-build solution for protecting steel structures, in compliance with VOC regulations May be specified as a one-coat direct-to-metal system in corrosive environments classified as C2 and...
Hempel Hemucryl 48120
Hemucryl 48120 is a high-build, flexible, water-borne, acrylic dispersion based paint. Contains zinc phosphate as anticorrosive pigment. It dries to a tough and corrosion protecting coating. Especially suited for application by airless spray Direct-to-metal coat in water-borne paint systems, ie. under bridges For professional use only....
Hempel Speed-Dry Alkyd 43141
Hempel's Speed-Dry Alkyd 43141 is a quick-drying anticorrosive single layer or finish coat pigmented with zinc phosphate as anticorrosive inhibiting pigment. Anticorrosive single layer coat for steel structures, general steel work and a multitude of applications for heavy and light steel industry, where quick drying properties are required...
Hempel Hempadur 47960
Hempadur 47960 is a two-component polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant, prolonged recoating properties, and pigmented with zinc phosphate. For professional use only Service temperature: 140°C (dry exposure) Use as a primer in mild to...
Hempel Hempadur 47300
Hempadur 47300 is a two-component epoxy paint, which cures to a hard and tough coating with good resistance to abrasion and seawater. It contains zinc phosphate for better corrosion protection. For professional use only Midcoat epoxy and self-primed high performance coating systems for atmospheric exposure, intended for all year...
Hempel Hempadur Multi-Strength 45540
Hempadur Multi-Strength 45540 is a two component pure epoxy paint which cures to an abrasion and corrosion resistant coating. Applicable by standard heavy duty airless spray equipment. Well suited for application under humid conditions and for early water exposure. For professional use only Maintenance and repair primer in Hempadur systems...
Hempel Speed-Dry Alkyd 43140
Hempel's Speed-Dry Alkyd 43140 is a very quick-drying anticorrosive primer/finish pigmented with zinc phosphate as anticorrosive inhibiting pigment. Single/double coat anticorrosive primer/finish for steel structures, general steel work and a multitude of applications for heavy and light steel industry, where quick drying properties are...
Hempel Pro Acrylic 55883
Hempel's Pro Acrylic 55883 is a two-component, isocyanate-free, acrylic finishing coat with good gloss and colour retention. It is resistant to water and spillage of aliphatic hydrocarbons For professional use only Finishing coat for protection of structural steel in severely corrosive environment, where light-fastness and gloss retention...
Hempel Hempathane HS 55613
Hempathane HS 55613 is a two-component semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zincphosphate. For professional use only For new build, maintenance and repair Up to 120°C service temperature VOC-compliant, high-build finishing coat for protection of structual...
Hempel Hempathane HS 55610
Hempel Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate. For professional use only Recommended as VOC compliant, highbuild finishing coat for protection of structural steel in severely corrosive environment, and may be...
Hempel Hempatex Hi-Build 46410
Hempatex HI-Build 46410 is a physically drying, high-build coating with good colour retention as a flat finish, based on acrylic resin and non-chlorinated plasticizer. Recommended as a primer, intermediate or finishing coat in Hempatex-systems in moderate corrosive environments, suitable as a self-priming repair and touch-up coating for...
Hempel Hempadur Mastic 45880
Hempadur Mastic 45880 is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, has good wetting properties and cures at low temperature. Recommended use as a self-primed, surface tolerant paint system, or as an intermediate or a topcoat in systems where low VOC and high film build are required EC-type examined as...
Watco Metal Paint Anti Rust Coating
Single-pack, anti-corrosive metal paint. 190 RAL colours (incl. Anthracite Grey) for interior and exterior surfaces. Suitable for metalwork, handrails, radiators, pipework, barriers, and garage doors. Quick-drying formulation allows for two coats in one day, touch dry in as little as one hour. Superior adhesion with minimal surface...